Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
Search Results "Access Aisle Width"
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Service Animal Permitted to Accompany Passenger on Flight and at Seat Assignment
, you must permit a dog or other service animal to accompany a passenger with a disability to the passenger’s assigned seat and remain there as long as the animal does not obstruct the aisle...
-
11B-705.1.2.3 Islands or cut-through medians
Detectable warnings at pedestrian islands or cut-through medians shall be 36 inches (914 mm) minimum in depth extending the full width of the pedestrian path or cut-through less 2 inches...
-
4.26.2* SIZE AND SPACING OF GRAB BARS AND HANDRAILS
The diameter or width of the gripping surfaces of a handrail or grab bar shall be 1-1/4 in to 1-1/2 in (32 mm to 38 mm), or the shape shall provide an equivalent gripping surface....
-
Seeger et al.
Both unoccupied and occupied dimensions of device width and length were measured as well as a set of other basic dimensions....
-
§ 38.159(b)(7) Platform gaps
Any openings between the platform surface and the raised barriers shall not exceed 5/8 inch (16 mm) in width....
-
III. Handrails and Stanchions
Of course, such a handrail or stanchion cannot encroach upon the required 32 inch width required for the doorway or the route leading to the clear floor space which must be at least 30 by...
-
11B-705.1.2.3 Islands or cut-through medians
Detectable warnings at pedestrian islands or cut-through medians shall be 36 inches (914 mm) minimum in depth extending the full width of the pedestrian path or cut-through less 2 inches...
-
III-4.4600 Seating in assembly areas
Public accommodations are required to remove barriers to physical access in assembly areas such as theaters, lecture halls, and conference rooms with fixed seating....
- GE Artistry™ Series 30" Free-Standing Electric Range ABS45DFWS
- Figure 1005.3.2 Extended Ground or Deck Surface at Fishing Piers and Platforms – Drawing from the U.S. Access Board
-
Willoughby Industries ASHS-1013-06-15-HCFA Ligature-resistant Front Access 15" wide Lavatory
Requires the Premium User plan or above. (Login or upgrade your account!)
- Figure 608.2.3 Alternate Roll-In Type Shower Compartment Size and Clearance – Drawing from the U.S. Access Board
- Figure 703.4.1 Height of Tactile Character Above Finish Floor or Ground – Drawing from the U.S. Access Board
- Figure 608.2.2 Standard Roll-In Type Shower Compartment Size and Clearance – Drawing from the U.S. Access Board
- Figure 608.5.3 Alternate Roll-In Type Shower Compartment Control Location – Drawing from the U.S. Access Board
- Figure 608.5.2 Standard Roll-In Type Shower Compartment Control Location – Drawing from the U.S. Access Board
-
4. Exception from the Requirements of M301 for Certain Examination Chairs that Comply with M302
The Access Board proposed in M101.2 in the MDE NPRM to require diagnostic equipment to meet the standards for each patient position supported, meaning that if diagnostic equipment was designed...
- AIA White Paper: A Proposal for additions to accessibility Standards for Nursing Home & Assisted Living Residents in Toileting and Bathing
- DOE Dear Colleague" Letter: Equal Access to Extracurricular Athletics for Students with Disabilities (Jan. 25, 2013)
-
Standing Supports (M304.3 and M305.3)
o 1 side of platform for dual ramp entry of platform o 2 sides of platform for single ramp entry with 34” minimum width between standing supports o The standing supports need to be tied...