Provide minimum vertical clearances of 114 in at accessible passenger loading zones and along vehicle access routes to such areas from site entrances....
Search Results "Clear Floor Area"
Filters
Commonly Searched Documents
-
4.6.6 VERTICAL CLEARANCE
-
3.5 Upgrades in Substantially Compliant Facilities
3.5 Upgrades in Substantially Compliant Facilities: For projects where the path of travel elements serving the area of alteration, addition or structural repair are largely compliant, it...
-
11B-804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1524...
-
§ 37.141(a)
(a) Two or more entities with overlapping or contiguous service areas or jurisdictions may develop and submit a joint plan providing for coordinated paratransit service....
-
Regulatory Process Matters
and performing area, accessible route required to directly connect both areas....
-
Newly Constructed Tabled Intersections That Contain Pedestrian Street Crossings With Yield or Stop Control (Section-by-Section Analysis)
In new construction, street intersections in hilly urban areas are typically cut-and filled to produce relative flat or tabled intersections....
-
Tread Obstacles on Outdoor Recreation Access Routes
Sometimes, an alteration project at an existing recreation site includes an area where stairs can't be avoided....
-
SIDEWALKS
Unless already provided, within three years of the effective date of this Agreement, the City of Waukegan will provide curb ramps or other sloped areas complying with the Standards or UFAS...
-
ANSI/BHMA: ADA Standard Section 105.2.1
Section 105.2.1 of the ADA Standards cover references to the ANSI/BHMA standards for door durability, strength, and performance.
-
Aisle Seats
Comments noted that this should apply only where armrests are provided on seats in the same area....
-
Door Hardware
Lever hardware is required for entry doors to the building and to individual dwelling units because these doors are part of the public and common use areas, and are, therefore, subject to...
-
11B-405.7.5 Doorways
Where doorways are located adjacent to a ramp landing, maneuvering clearances required by Sections 11B-404.2.4 and 11B-404.3.2 shall be permitted to overlap the required landing area....
-
Platform Edges
Since the sway of some rail cars may overlap a platform edge, the area of the detectable warning installation should not be considered a safety zone but rather an indication of an adjacent...
-
OBJECTIVES
This report summarizes topic areas that address issues of signalization of roundabouts to provide pedestrian access....
-
Section 206.3
The Department is retaining language from former §10.3.1(1), which provides that “Elements such as ramps, elevators, or other circulation devices, fare vending or other ticketing areas,...
-
11B-405.7.5 Doorways
Where doorways are located adjacent to a ramp landing, maneuvering clearances required by Sections 11B-404.2.4 and 11B-404.3.2 shall be permitted to overlap the required landing area....
-
11B-1005.3 Edge protection
platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs or other mobility devices to pull into a clear...
-
Q6.) How important is the method of measurement in considering the tolerances allowable in finished construction?
The industry’s standards are usually very clear about how to make their measurements. Unfortunately, where no standards exist, the methods are subject to interpretation and argument. ...
-
Edge Protection
This design allows a person using a wheelchair or other mobility device to pull into a clear space and move beyond the face of the railing to view the water in different directions....
-
7. Self-Evaluation and Transition Plans
While it is unclear whether the City has drafted a self-evaluation plan, the authorities are clear that Plaintiff has no legal basis to sue based on the lack of such a plan. 28...
-
R403 Operable Parts (Section-by-Section Analysis)
A clear space must be provided at operable parts (see R404). Operable parts must be located within the reach ranges (see R406)....
-
12101(a)(1)
L. 110-325, § 2, Sept. 25, 2008, 122 Stat. 3553, provided that: (1) in enacting the Americans with Disabilities Act of 1990 (ADA), Congress intended that the Act "provide a clear and...
-
§35.163 Information and Signage (Section-by-Section Analysis)
Several commenters requested that, where TDD-equipped pay phones or portable TDD's exist, clear signage should be posted indicating the location of the TDD....
-
Company Structure, Conduct Policy, and Discipline:
Explain corporate structure to employee, using visual charts and clear descriptions of positions and reporting structure....