The section of a parking spur connecting the road accessing a campground and a vehicle parking area....
Search Results "Clear Floor Area"
-
Driveway
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2)....
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2)....
-
Accessible Routes to Press Boxes
The 1991 Standards, at sections 4.1.1(1) and 4.1.3(1), cover all areas of newly constructed facilities required to be accessible, and require an accessible route to connect accessible entrances...
-
Elements in the 2010 ADA Standards Not in the 1991
These elements include recreation facilities such as swimming pools, team and player seating, accessible routes in court sports facilities, saunas and steam rooms, fishing piers, play areas...
-
Application [§201]
In new construction, all areas must be fully accessible, including multiple spaces of the same type, unless otherwise specified....
-
ACCESSIBILITY
Accessibility includes the considerations of the area or environment in which physical activity takes place, the safety and security within the space, and specifications suggested for particular...
-
Safe harbor.
The Department invites comment on whether public entities that operate existing facilities with play or recreation areas should be exempted from compliance with certain requirements in the...
-
[F] 907.4.2.2 Height
The height of the manual fire alarm boxes shall be a minimum of 42 inches (1067 mm) and a maximum of 48 inches (1219 mm) measured vertically, from the floor level to the activating handle...
-
Disorienting Spaces (slide 7)
And the flooring pattern is such that there’s a little offset, but it continues on in through the glass. I would walk into that wall. You know, it’s hard to tell....
-
11B-604.7 Dispensers
The outlet of the dispenser shall be below the grab bar, 19 inches (483 mm) minimum above the finish floor and shall not be located behind grab bars....
-
11B-404.2.11 Vision lights
gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel located 43 inches (1092 mm) maximum above the finish floor...
-
11B-404.2.11 Vision lights
gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel located 43 inches (1092 mm) maximum above the finish floor...
-
11B-608.5.2 Standard roll-in type shower compartments
the seat 16 inches (406 mm) minimum and 27 inches (686 mm) maximum from the seat wall; and shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor...
- WorkZone Safety Products Retractable Cone Bar
- Takeform Fusion Signage Overheads Type C
-
Motivational Characteristics
Light levels that are fairly uniform while still providing areas of interest....
-
11B-202.2 Additions
Each addition that affects or could affect the usability of or access to an area containing a primary function shall comply with 202.4. ...
-
Protruding objects and vitrines
aprons, extend bases, or add barriers below objects and vitrines that project more than 4" from walls and have their leading edges greater than 27" and less than 80" above the finished floor...
-
4.30.3 Character Height
Height Above Finished Floor Minimum Character Height Suspended or Projected Overhead in compliance with 4.4.2 3 in (75mm) minimum...
-
Are accessible spaces required in temporary parking lots and in unpaved lots, such as gravel or grass lots?
parking facilities, including gravel or grass lots, parking spaces and access aisles must be marked and have firm, stable, and slip resistant surfaces as specified for accessible ground and floor...
-
§ 38.107(a)(4)
Controls for flush valves shall be mounted no more than 44 inches above the floor....
-
§ 38.123(a)(4)
Controls for flush valves shall be mounted no more than 44 inches above the floor....
-
§ 38.23(c)(3) Ramp threshold
The transition from roadway or sidewalk and the transition from vehicle floor to the ramp may be vertical without edge treatment up to 1/4 inch....