B. Destination and Route Signs. (The following specifications, which are required for buses (§38.39), are recommended for other types of vehicles, particularly light rail vehicles,...
Search Results "ALS Signage"
Filters
Commonly Searched Documents
-
B. Destination and Route Signs
-
11B-703.5.10 Format
Text shall be in a horizontal format.
-
11B-407.2.3 Hoistway signs
Signs at elevator hoistways shall comply with Section 11B-407.2.3.
-
11B-703.7 Symbols of accessibility
Symbols of accessibility shall comply with Section 11B-703.7. Advisory 11B-703.7 Symbols of accessibility. Symbols of accessibility, such as the International Symbol of...
-
DIRECTIONAL SIGN
[DSA-AC, HCD 1 & HCD 2]. A publicly displayed notice which indicates by use of words or symbols a recommended direction or route of travel.
-
11B-703.7.2 Symbols
[See subsections ...]
-
11B-703.1.1.1 Plan review
Plans, specifications or other information indicating compliance with these regulations shall be submitted to the enforcing agency for review and approval.
-
11B-703.2.9 Format
Text shall be in a horizontal format.
-
11B-703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background.
-
2.2.3 Receivers
Unlike many personal FM receivers, those used with ALS generally do not include a warning light signal when the battery is weak....
-
Directional visual sign vs. room identification tactile sign
Just a clarification comment on this particular sign. The arrow appears to indicate that this specific sign is a directional sign pointing toward the location of an accessible...
-
11B-410.8 Restriction sign
3094.2(e), 2094.2(g), and 3094.2(p).These regulations address technical requirements for lifts, including platform size, gate configurations for lifts with 90-degree egress, and required signage...
-
11B-410.8 Restriction sign
These regulations address technical requirements for lifts, including platform size, gate configurations for lifts with 90-degree egress, and required signage as follows: (1) lift capacity...
-
Elevators: ADA Standard Section 216.7
Section 216.7 covers scoping requirements in the current ADA Standards for signs at elevators.
-
Character Height: ADA Standard Section 703.2.5
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter...
-
Entrances: ADA Standard Section 810.6.1
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with 703.2 and shall be placed in uniform locations to the maximum extent practicable....
-
Finish and Contrast: ADA Standard Section 703.7.1
Symbols of accessibility and their background shall have a non-glare finish. Symbols of accessibility shall contrast with their background with either a light symbol on a dark...
-
Position: ADA Standard Section 703.3.2
Braille shall be positioned below the corresponding text. If text is multi-lined, braille shall be placed below the entire text. Braille shall be separated 3/8 inch (9.5 mm) minimum...
-
Bus Signs: ADA Standard Section 810.4
Bus route identification signs shall comply with 703.5.1 through 703.5.4, and 703.5.7 and 703.5.8. In addition, to the maximum extent practicable, bus route identification signs...
-
Check-Out Aisles: ADA Standard Section 216.11
Section 216.11 covers scoping requirements in the current ADA Standards for signs at check-out aisles.
-
11B-810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with Section 11B-703.2 and shall be placed in uniform locations to the maximum extent...
-
11B-703.7.1 Finish and contrast
Symbols of accessibility and their background shall have a non-glare finish. Symbols of accessibility shall contrast with their background with either a light symbol on a dark...
-
11B-703.3.2 Position
Braille shall be positioned below the corresponding text in a horizontal format, flush left or centered. If text is multi-lined, Braille shall be placed below the entire text....
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter...