3094.2(e), 2094.2(g), and 3094.2(p).These regulations address technical requirements for lifts, including platform size, gate configurations for lifts with 90-degree egress, and required signage...
Search Results "ALS Signage"
Filters
Commonly Searched Documents
-
11B-410.8 Restriction sign
-
11B-410.8 Restriction sign
These regulations address technical requirements for lifts, including platform size, gate configurations for lifts with 90-degree egress, and required signage as follows: (1) lift capacity...
-
Elevators: ADA Standard Section 216.7
Section 216.7 covers scoping requirements in the current ADA Standards for signs at elevators.
-
Character Height: ADA Standard Section 703.2.5
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter...
-
Entrances: ADA Standard Section 810.6.1
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with 703.2 and shall be placed in uniform locations to the maximum extent practicable....
-
Finish and Contrast: ADA Standard Section 703.7.1
Symbols of accessibility and their background shall have a non-glare finish. Symbols of accessibility shall contrast with their background with either a light symbol on a dark...
-
Position: ADA Standard Section 703.3.2
Braille shall be positioned below the corresponding text. If text is multi-lined, braille shall be placed below the entire text. Braille shall be separated 3/8 inch (9.5 mm) minimum...
-
Bus Signs: ADA Standard Section 810.4
Bus route identification signs shall comply with 703.5.1 through 703.5.4, and 703.5.7 and 703.5.8. In addition, to the maximum extent practicable, bus route identification signs...
-
Check-Out Aisles: ADA Standard Section 216.11
Section 216.11 covers scoping requirements in the current ADA Standards for signs at check-out aisles.
-
11B-810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with Section 11B-703.2 and shall be placed in uniform locations to the maximum extent...
-
11B-703.3.2 Position
Braille shall be positioned below the corresponding text in a horizontal format, flush left or centered. If text is multi-lined, Braille shall be placed below the entire text....
-
11B-703.7.1 Finish and contrast
Symbols of accessibility and their background shall have a non-glare finish. Symbols of accessibility shall contrast with their background with either a light symbol on a dark...
-
11B-206.4.1 Entrances
All entrances shall comply with Section 11B-404. [2010 ADA Standards] 206.4.1 Public Entrances. In addition to entrances required by 206.4.2 through 206.4.9, at least 60 percent...
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter...
-
11B-810.4 Bus signs
Bus route identification signs shall comply with Sections 11B-703.5.1 through 11B-703.5.4, and Sections 11B-703.5.7 and 11B-703.5.8. In addition, to the maximum extent practicable,...
-
11B-219.2 Required systems
An assistive listening system shall be provided in assembly areas, including conference and meeting rooms. [2010 ADAS] 219.2 Required Systems. In each assembly area where audible...
-
11B-706.3 Receiver hearing-aid compatibility
Receivers required to be hearing-aid compatible shall interface with telecoils in hearing aids through the provision of neckloops. [2010 ADAS] Advisory 706.3 Receiver Hearing-Aid...
-
§ 1194.23(i)
(i) Interference to hearing technologies (including hearing aids, cochlear implants, and assistive listening devices) shall be reduced to the lowest possible level that allows a user...
-
706.3 Receiver Hearing-Aid Compatibility
Receivers required to be hearing-aid compatible shall interface with telecoils in hearing aids through the provision of neckloops. [ECTCR UFAS 4.33.7] Advisory 706.3 Receiver...
-
706.3 Receiver Hearing-Aid Compatibility
Receivers required to be hearing-aid compatible shall interface with telecoils in hearing aids through the provision of neckloops. Advisory 706.3 Receiver Hearing-Aid...
-
706.3 Receiver Hearing-Aid Compatibility
706.3 Receiver Hearing-Aid Compatibility. Receivers required to be hearing-aid compatible shall interface with telecoils in hearing aids through the provision of...
-
2.1.2.2 Additional Proposed Specifications (by Oval Window Audio)
2.1.2.2 Additional Proposed Specifications (by Oval Window Audio) 1. Loop Wire Installation: In order to maximize signal strength and uniformity, the loop wire shall be installed...
-
11B-219 Assistive listening systems.
[See subsections ...]
-
11B-706.3 Receiver hearing-aid compatibility
11B-706.3 Receiver hearing-aid compatibility. Receivers required to be hearing-aid compatible shall interface with telecoils in hearing aids through the provision of...