A level landing 4 feet (1219 mm) deep shall be provided at the upper end of each curb ramp over its full width to permit safe egress from the ramp surface, or the slope of the fanned or...
Search Results "Access Aisle Width"
Filters
Commonly Searched Documents
-
1127B.5, Item 4
-
Showers
Several commenters requested that the final Guidelines provide dimensions on the appropriate width and height of showers and shower doors....
-
In-swinging Bathroom Doors
Once a minimum door width is provided, a tenant who finds a bathroom not readily usable can have the door rehung as an outswinging door....
-
Construction Specification Institute
For longitudinal lines, measurements were to be taken in minimum 5 - foot lengths running parallel to the long dimension, with one measurement line per 3 feet of width and within 2 feet...
-
U.S. Access Board - Supervisory Technical Services Officer
Access Board seeks a Supervisory Technical Services Officer (GS 15) to serve in its Office of Technical and Information Services. Applications are due by February 25, 2022....
-
Access for All: Five Years of Progress A Report from the Department of Justice on Enforcement of the Americans with Disabilities Act
[See subsections ...]
-
49 CFR Part 38 - ADA Accessibility Specifications for Transportation Vehicles (with amendments issued through 2014)
Authority: 42 U.S.C. 12101-12213; 49 U.S.C. 322. Source: 56 FR 45756, Sept. 6, 1991, unless otherwise noted.
-
§ 38.83(b)(5) Platform barriers
Such barriers shall not interfere with maneuvering into or out of the aisle....
-
§ 38.23(b)(5) Platform barriers
Such barriers shall not interfere with maneuvering into or out of the aisle....
-
§ 38.159(b)(5) Platform barriers
Such barriers shall not interfere with maneuvering into or out of the aisle....
-
E.2. - Where an agency uses a best value "trade-off" source selection process, may it trade off applicable technical provisions of the Access Board’s standards where an offer provides strong technical merit, strong past performance, or a lower price?
The Access Board’s technical provisions are mandatory requirements that must be met (directly or through equivalent facilitation) unless (a) the product or service (if it is a commercial...
-
Rockwood Manufacturing Company BFRC24 Vertical Rod Cover
Height: 24" Width: 3-1/4" Projection: 1-5/8" Weight: 1.8 lbs....
-
Rockwood Manufacturing Vertical Rod Cover BFRC12
Height: 12" Width: 3-1/4" Projection: 1-5/8" Weight: 0.9 lbs....
-
Lift Compatibility (M301.4 and M302.4)
A patient lift may be the only means of providing access to certain equipment that cannot meet the technical criteria for transfer surface height (see M301.2.1 and M302.2.1) because of the...
-
Figure 404.2.4.2(b) Maneuvering Clearances at Doorways without Doors, Sliding Doors, Gates, and Folding Doors – Drawing from the U.S. Access Board
-
Figure 404.2.4.2(d) Maneuvering Clearances at Doorways without Doors, Sliding Doors, Gates, and Folding Doors – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(e) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Pull Side – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(f) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(h) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(j) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Push Side – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(d) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Pull Side – Drawing from the U.S. Access Board
-
Figure 404.2.4.2(c) Maneuvering Clearances at Doorways without Doors, Sliding Doors, Gates, and Folding Doors – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(b) Maneuvering Clearances at Manual Swinging Doors and Gates: Front Approach, Push Side – Drawing from the U.S. Access Board
-
Impacts on State and Local Governments
State and local transportation departments may be required to comply with three accessibility standards....
