Section 221.2.2 covers scoping requirements in the current ADA Standards for integration of wheelchair spaces in assembly areas.
Search Results "Accessibility Standard"
Commonly Searched Documents
-
Integration: ADA Standard Section 221.2.2
-
5) Mercantile
Accessible counters must be dispersed throughout the facility....
- Tobii Technology PCEye Go
- Inclusion Solutions Frankie Adjustable Single Voting Booth
-
11B-1005.2.1 Height
[2010 ADA Standards] EXCEPTION: Where a guard complying with sections 1003.2.12.1 and 1003.2.12.2 of the International Building Code (2000 edition) or sections 1012.2 and 1012.3 of the...
-
E103.4 Defined Terms (Section-by-Section Analysis)
Two other terms are new to the proposed 508 Standards, but have close analogs in the existing standards....
-
407.3.1 Identification (Section-by-Section Analysis)
This section is new to the 255 Guidelines, but is similar to existing 508 Standards §§ 1194.23(k)(1), 1194.25(c), and 1194.26(b)....
-
NSS Questions and Concerns
[ADA Standards § 4.16.4; 4.17.6] Yes/No.”...
-
Background
Current accessibility standards include criteria related to seat height, clear floor space, and grab bar placement in places where transfers are expected [7]....
-
4.3.8 Operating forces
• Utilizing standard terminology from anthropometry in reference to grip forms; the standards could list the types of grips and movements, including alternatives to standard grip forms...
-
Section 36.406(c) Places of Lodging
, the residential standards should apply....
-
H. - Applicability
This date was established by operation of the law, which authorizes such actions 6 months after the date the Access Board published its standards as a final rule (which was on December 21...
-
What this Checklist is Not
What this Checklist is Not The ADA title II and III regulations require more than program accessibility and barrier removal....
-
§ 36.101(a) Purpose
basis of disability by covered public accommodations and requires places of public accommodation and commercial facilities to be designed, constructed, and altered in compliance with the accessibility...
-
106.5.57 Safe Harbor
Elements of a path of travel at a subject building or facility that have been previously constructed or altered in accordance with the April 1, 1994 Texas Accessibility Standards (TAS) are...
-
202.4 Alterations Affecting Primary Function Areas
. 2010 ADA Standards …and scope as determined under criteria established by the Attorney General....
-
1. Executive Summary
As discussed in the preamble to the proposed accessibility guidelines for pedestrian facilities in the public right-of- way, other federal agencies are required to adopt accessibility standards...
-
11B-233.1 General
[2010 ADA Standards] 233.1 General. Facilities with residential dwelling units shall comply with 233....
-
§382.51 What requirements must carriers meet concerning the accessibility of airport facilities?
[Doc. No. DOT-OST-2004-19482, 73 FR 27665, May 13, 2008, as amended at 74 FR 11471, Mar. 18, 2009; 75 FR 44887, July 30, 2010]
-
Registered Accessibility Specialist (RAS) Bulletin RAS 2014-03 Equivalent Facilitation
RAS 2014-03 Equivalent Facilitation Effective Date: July 7, 2014 2012 TAS Reference: 103 In accordance with the 2012 TAS, Advisory 103, all determinations of...
-
Tom Williams, AIA, National Accessibility Officer, GSA, Public Buildings Service
Introductory comments based on a Recent Article on Daylighting in Architectural Record (2009) The subject matter for our panel is natural lighting. I’m not an expert – I am an...
-
Accessible Pathway & Corridor: Minimum Clear Width Required for 180-degree Turn
This data depicts the amount of space required by users of wheeled mobility devices to perform a 180-degree turn. The bold dashed line in the table and figure indicates the...
-
Accessible Pathway & Corridor: Minimum Clear Width Required for 90-degree Turn
This data depicts the amount of space required by users of wheeled mobility devices to perform a 90-degree turn ("L-Turn"). The bold dashed line in the table and figure indicates...
-
§ 37.185 Fleet accessibility requirement for OTRB fixed-route systems of large operators
Each large operator subject to the requirements of §37.183 shall ensure that--