Work Areas Proposed paragraph 36.401(b) addressed access to employment areas, rather than to the areas where goods or services are being provided....
Search Results "Sloped Area"
-
Work Areas (Preamble, Section-by-Section Analysis)
-
Area of Rescue Assistance
An area, which has direct access to an exit, where people who are unable to use stairs may remain temporarily in safety to await further instructions or assistance during emergency evacuation...
-
1009.11 Instructions
In areas of refuge and exterior areas for assisted rescue, instructions on the use of the area under emergency conditions shall be posted....
-
1009.3.2 Submerged Depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
-
Ramps [4.8]
Where the running slope of an accessible route is more than 5%, it is considered a ramp. Generally, changes in level up to 6 inches can be treated as a curb ramp....
-
11B-1009.3.2 Submerged depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....
-
1009.3.2 Submerged Depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
-
1009.11 Instructions
In areas of refuge, exterior areas for assisted rescue and locations required to provide two-way communications systems complying with Section 1009.8, instructions on the use of the area...
-
§100.201 Common use areas
Common use areas means rooms, spaces or elements inside or outside of a building that are made available for the use of residents of a building or the guests thereof....
-
M303.3.3.1 Running Slope
Ramp runs shall have a running slope not steeper than 1:12....
-
Passenger Loading Zones [4.6.6]
A level surface (maximum 2% slope in any direction) for both the space and aisle is important for wheelchair transfer to and from vehicles and deployment of vehicle lifts or ramps....
-
Q1.) When a ramp has a maximum slope of 1:12 or 8.33%, is that considered a range of from 0% to 8.33% which would allow no slope greater than 8.33% or is that a simple maximum which would allow a tolerance above 8.33%? Similarly, is a cabinet countertop that can be no higher than 34” AFF a range of from 0” to 34” AFF with no additional height allowed, or is a tolerance allowed for variations in the floor surface or cabinet construction?
A1.) The consistent technical assistance on this question has been that both are subject to tolerances.
-
Surface: ADA Standard Section 810.2.1
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
1009.6.4 Separation
Each area of refuge shall be designed to minimize the intrusion of smoke. Exceptions: 1....
-
1009.6.4 Separation
Each area of refuge shall be designed to minimize the intrusion of smoke. Exceptions: 1....
-
Areas of Refuge: ADA Standard Section 216.4.2
Section 216.4.2 covers scoping requirements in the current ADA Standards for signs at areas of refuge.
-
11B-206.2.17 Play areas
Play areas shall provide accessible routes in accordance with Section 11B-206.2.17....
-
11B-206.2.17 Play areas
Play areas shall provide accessible routes in accordance with Section 11B-206.2.17....
-
11B-206.2.17 Play areas
Play areas shall provide accessible routes in accordance with Section 11B-206.2.17....
-
14. If an alteration is being made to part of a play area, does the entire play area need to be upgraded with accessible components and surfacing?
If an alteration is being made to part of a play area, does the entire play area need to be upgraded with accessible components and surfacing?...
-
1009.3.2 Submerged Depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
-
Suggestions by Jean Tessmer
Suggestions by Jean Tessmer As published in Concrete Technology Today, April 2001, Jean Tessmer, accessibility consultant for Space Options, suggested that ramp slopes be measured with...