Lifting Capacity Lifts must have the capability of supporting a minimum weight of 300 pounds and be capable of sustaining a static load that is at least 1.5 times the rated load....
Search Results "Loading Condition"
-
Lifting Capacity
-
Transfer Surface Height (M301.2.1 and M302.2.1)
Measuring the height of the transfer surface from the floor to the top of the upholstery under static conditions, without compression or deflection in the transfer surface, would provide...
-
Transfer Height
Transfer Height Ride seats designed for transfer must be between 14 and 24 inches above the load and unload area surface....
-
Clearances: ADA Standard Section 1002.4.4
This exception for protruding objects applies to the ride devices, not to circulation areas or accessible routes in the queue lines or the load and unload areas....
-
10.3.1(9)
shall be coordinated with the floor height of new vehicles so that the vertical difference, measured when the vehicle is at rest, is within plus or minus 5/8 inch under normal passenger load...
-
[A] 111.2 Certificate issued
The design occupant load. If an automatic sprinkler system is provided, whether the sprinkler system is required....
-
§ 38.175(a)
door at rest and the platform shall be no greater than 3 inches and the height of the car floor shall be within plus or minus 5/8 inch of the platform height under all normal passenger load...
-
111.2 Certificate issued
The design occupant load. If an automatic sprinkler system is provided, whether the sprinkler system is required....
-
1135A.1 General
Where front-loading clothes washers are not provided, management shall provide assistive devices, on request of the occupant, to permit the use of top-loading clothes washers....
-
1135A.1 General
Where front-loading clothes washers are not provided, management shall provide assistive devices, on request of the occupant, to permit the use of top-loading clothes washers....
-
1131B.2, Item 1
SECTION 1131B - PASSENGER DROP-OFF AND LOADING ZONES 1131B.2 Passenger loading zones. 1. General. ...
-
Altered Rides
An existing ride is also considered an altered ride if the load or unload area is newly designed or constructed....
-
§ 38.95(c)(5) Slope
If the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 3 inches or less above the station platform a maximum slope of 1:4 is permitted; if the height...
-
§ 38.83(c)(5) Slope
If the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 3 inches or less above the station platform a maximum slope of 1:4 is permitted; if the height...
-
§ 38.125(c)(5) Slope
If the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 3 inches or less above the station platform a maximum slope of 1:4 is permitted; if the height...
-
11B-1002.4.4 Clearances
This exception for protruding objects applies to the ride devices, not to circulation areas or accessible routes in the queue lines or the load and unload areas. ◼...
-
11B-1002.4.4 Clearances
This exception for protruding objects applies to the ride devices, not to circulation areas or accessible routes in the queue lines or the load and unload areas. ◼...
-
1135A.1 General
Where front-loading clothes washers are not provided, management shall provide assistive devices, on request of the occupant, to permit the use of top-loading clothes washers....
-
Rotational Penetrometer
A wheelchair caster placed on a spring loaded caliber in a metal tripod frame which suspends the caster about 6 inches over the surface. ...
-
11B-213.3 Plumbing fixtures and accessories
Plumbing Code (CPC), Table 422.1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
-
11B-213.3 Plumbing fixtures and accessories
Plumbing Code (CPC), Table 422.1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor....
-
11B-1002.6 Transfer devices for use with amusement rides
Transfer devices for use with amusement rides shall comply with Section 11B-1002.6 when positioned for loading and unloading....