Where a forward approach is provided, the clear floor or ground space shall provide knee and toe clearance complying with Section 11B-306....
Search Results "Latch Side Clearance"
Commonly Searched Documents
- 
    
  
  11B-804.6.4 Range or cooktop 
  
- 
    
  
  11B-804.6.4 Range or cooktop
  Where a forward approach is provided, the clear floor or ground space shall provide knee and toe clearance complying with Section 11B-306.... 
- 
    
  
  11B-804.6.4 Range or cooktop
  Where a forward approach is provided, the clear floor or ground space shall provide knee and toe clearance complying with Section 11B-306.... 
- 
    
  
  804.6.4 Range or Cooktop
  Where a forward approach is provided, the clear floor or ground space shall provide knee and toe clearance complying with 306.... 
- 
    
  
  Grab Bars: ADA Standard Section 604.5
  Section 604.5 covers the current ADA Standards for grab bars that are used for water closets. 
- 
    
  
  406.4.1 Clear height
  While the minimum height is required to be 7'-0" by this section, greater vertical clearance is required at van-accessible parking spaces, standard accessible parking spaces, the vehicular... 
- 
    
  
  5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301)
  5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301) The Committee recommends the equipment base provide a clearance of 39 inches wide minimum.... 
- 
    
  
  503.5 Vertical Clearance
  503.5 Vertical Clearance.... 
- Figure 604.8.1.4 Wheelchair Accessible Toilet Compartment Toe Clearance – Drawing from the U.S. Access Board
- 609.3 Grab Bar Vertical Clearance
- 
    
  
  A4.16.4 Grab Bars
  A6(a) and (b) show the diagonal and side approaches most commonly used to transfer from a wheelchair to a water closet.... 
- 
    
  
  A4.16.4 GRAB BARS
  A5(a) and (b) show the diagonal and side approaches most commonly used to transfer from a wheelchair to a water closet.... 
- 
    
  
  4. Desk with knee and toe space
  4. Desk with knee and toe space and clear floor space for front approach. 
- 
    
  
  Grab Bars [4.16.4]
  Grab Bars [4.16.4] The back grab bar is most usable from the open side. It must be 36 inches long minimum, installed with one end space a maximum of 6 inches from the side wall.... 
- Figure 607.2 Clearance for Bathtubs – Drawing from the U.S. Access Board
- 
    
  
  b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
  In the proposed rule, obstructions were not permitted within the knee and toe clearance space.... 
- 
    
  
  1017.9 Protruding Objects
  However, entities should maintain the vertical clearance along the trail tread, resting intervals, and passing spaces free from tree branches for 80 inches high minimum above the ground.... 
- 
    
  
  Head Room [4.4.2]
  Circulation paths must provide at least 80 inches of vertical clearance. Otherwise, fixed barriers detectable by canes must define areas with less clearance.... 
- 
    
  
  Diagonal Curb Ramps: ADA Standard Section 406.6
  Section 406.6 covers the current ADA Standards for diagonal curb ramps. 
- 
    
  
  F213.2.1 Unisex (Single-Use or Family) Toilet and Unisex Bathing Rooms
  Doors to unisex toilet rooms and unisex bathing rooms shall have privacy latches.... 
- 
    
  
  213.2.1 Unisex (Single-Use or Family) Toilet and Unisex Bathing Rooms
  Doors to unisex toilet rooms and unisex bathing rooms shall have privacy latches.... 
- 
    
  
  Base Support [No specific provision—affects M303.2.4]
  The anthropomorphic data, as well as the calculated footrest clearances, are below in Tables 4 and 5. Table 4.... 
- 
    
  
  M302.4.1 Clearance in Base
  The base of the diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum... 
- 
    
  
  M302.4.1 Clearance in Base
  The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum measured... 
