Exception: Golf car passages complying with Section 11B-1006.3 shall be permitted to be used for all or part of accessible routes required by Section 11B-206.2.15....
Search Results "Supplemental Requirement"
-
11B-206.2.15 Golf facilities
-
11B-503.5 Vertical clearance
This differs from the 98 inch vertical clearance requirement for accessible parking spaces. Commercial vans used for accessible transit may be taller than passenger vans. ◼...
-
COMMENTS
assessment of their compliance with the ADA's barrier removal requirements....
-
Captioning at sporting venues. (Section-by-Section Analysis)
Other commenters argued for flexibility in the requirements for providing captioning and that any requirement should only apply to stadiums constructed after the effective date of the regulation...
-
§382.51(a)
(a) As a carrier, you must comply with the following requirements with respect to all terminal facilities you own, lease, or control at a U.S. airport:...
-
§382.101(c)
(c) You are using an aircraft subject to an exception from the lift boarding and deplaning assistance requirements under §382.97(a)-(c) of this subpart;...
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
804.6.5.1 Side-Hinged Door Ovens
Side-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to the latch side of the oven door....
-
§382.69(b)
(b) The requirements of paragraph (a) of this section go into effect with respect to audio-visual displays used for safety purposes on November 10, 2009....
-
§382.85(a)(2)
(2) If you use the “designated priority seats” mechanism of §382.83(a)(2) of this part, you must implement the requirements of this section as follows:...
-
§382.141(a)(7)
(7) The employees you designate as CROs, for purposes of §382.151 of this part, must receive training concerning the requirements of this part and the duties of a CRO....
-
M302.3.1 Transfer Supports
Transfer supports shall be provided for use with transfer sides required by M302.2.4 and shall comply with M305.2.1.1, M305.2.2.1, and M305.2.3 through M305.2.8....
-
F206.5.1 Entrances
Each entrance to a building or facility required to comply with F206.4 shall have at least one door, doorway, or gate complying with 404....
-
§ 1194.3(f)
(f) Products located in spaces frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment are not required to comply with this part....
-
STEP 3
Table 240.2.1.2 requires a minimum of 1....
-
Is Identification of the Path(s) to the Means of Egress Necessary?
No Special Requirements. Once notified, people who are deaf or hard of hearing can read and follow standard exit and directional signs....
-
5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height
Edge protection is not required on platforms 1 ½ inches or less in height....
-
F206.7.2 Wheelchair Spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of F221 and 802....
-
T302.1 General
EXCEPTION: Walking surfaces on lifts shall not be required to comply with T302....
-
Proposed standards
Proposed standards means the requirements set forth in appendices B and D to 36 CFR part 1191 as adopted by the Department of Justice. * * * * *...
-
302.1 Without Vision
Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that does not require user vision....
-
502.1 General
EXCEPTION: ICT conforming to 402 shall not be required to conform to 502....
-
§27.11(a)(3)
(3) The responsible Departmental official may, where necessary to overcome the effects of a violation of this part, require a recipient to take remedial action:...
-
11B-216.8.1 Geometric symbols
Provides Exceptions 1 and 2 for locations where geometric symbols are not required....