Amusement rides designed primarily for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces...
Search Results "Floor Designation"
-
216.12 Amusement Rides
-
Safe Harbor – Construction Prior to March 15, 2012
Safe Harbor – Construction Prior to March 15, 2012 Elements in facilities built or altered before March 15, 2012 that comply with the 1991 ADA Standards for Accessible Design (1991 Standards...
-
A4.33.3 Placement of Wheelchair Locations
Consideration of this positive attribute of “continental” seating should be included along with all other factors in the design of fixed seating areas....
-
Trail Classes
They are based on forest plan direction and represent intended design and management standards....
-
103 Equivalent Facilitation
103 Equivalent Facilitation Nothing in these requirements prevents the use of designs, products, or technologies as alternatives to those prescribed, provided they result in substantially...
-
Doors [9.2.2(3), 9.4]
Doors [9.2.2(3), 9.4] Compliance with 4.13 is required for all doors and doorways designed to allow passage into and within all sleeping suites or other units required to be accessible...
-
Selection of Participants
Selection of Participants The principal investigators at OSU were to pilot test the survey instruments with professional contacts in parks and recreation that manage pedestrian trails designed...
-
§100.205(e)(2)(v) 2003 International Building Code (IBC)
(v) 2003 International Building Code (IBC), if adopted without modification and without waiver of any of the provisions intended to address the Fair Housing Act's design and construction...
-
V. Integrated Programs
For example, it would not be a violation for a city to offer recreational programs specially designed for children with mobility impairments, but it would be a violation if the city refused...
-
11B-503.5 Vertical clearance
The minimum vertical clearance at designated passenger drop-off and loading zones, and along at least one vehicle access route to the area from site entrances and exits, is 114 inches....
-
11B-308.4 Suggested reach ranges for children
Where building elements such as coat hooks, lockers, or operable parts are designed for use primarily by children, the suggested dimensions of Table 11B-308.4 shall be permitted....
-
11B-233.1 General
The definition for “Public Housing” in Chapter 2 of the California Building Code (CBC) is based on the Americans with Disabilities Act (ADA) and the 2010 ADA Standards for Accessible Design...
-
11B-233.1 General
The definition for “Public Housing” in Chapter 2 of the California Building Code (CBC) is based on the Americans with Disabilities Act (ADA) and the 2010 ADA Standards for Accessible Design...
-
3.4 Disability/Accessibility Organizations.
The Center for Universal Design (www.ncsu.edu/ncsu/design/cud); 8. Disability and Business Technical Assistance Centers (www.adata.org); 9....
-
[2010 ADAS] 105.2.4 ICC/IBC
While typical elevators are not designed to be used during an emergency evacuation, evacuation elevators are designed with standby power and other features according to the elevator safety...
-
221 Assembly Areas
Section 221.1 contains a general charging statement that assembly areas provide wheelchair spaces, companion seats, and designated aisle seats....
-
F105.2.4 ICC/IBC
While typical elevators are not designed to be used during an emergency evacuation, evacuation elevators are designed with standby power and other features according to the elevator safety...
-
105.2.4 ICC/IBC
While typical elevators are not designed to be used during an emergency evacuation, evacuation elevators are designed with standby power and other features according to the elevator safety...
-
Conclusions
These results reflect static anthropometry measurements and should be considered as a starting point for accessible design of a seating surface....
-
5.9.1 Standing Supports Recommendation In Reference To Mammography Equipment
For these purposes, the equipment criteria should designate these supports as positioning supports and be designed with the structural strength required for positioning activities....
-
Standing Supports [M305.2]
For these purposes, the equipment criteria should designate these supports as positioning supports and be designed with the structural strength required for positioning activities....
-
The Roles of the Access Board and the Department of Justice
The ADA requires the Access Board to "issue minimum guidelines that shall supplement the existing Minimum Guidelines and Requirements for Accessible Design for purposes of subchapters II...
-
25. Is a probationary employee entitled to reassignment?
Employers cannot deny a reassignment to an employee solely because s/he is designated as "probationary."...
-
206.2.1 Site Arrival Points
Department of Transportation and most State departments of transportation are revising their design standards and regulations for the public right of way based on recent research and guidelines...