Recommendation: ADAAG does not specifically address other types of openings or gaps in ground or floor surfaces, such as those between pavers or at expansion joints....
Search Results "Floor Designation"
-
Gratings [4.5.4]
-
2.1.2.1 Summary of IEC 118‒4 (1981) Standards
These values apply to the vertical component of the field strength inside the area enclosed by the loop, measured 1.2 meters above the floor....
-
608.6 Shower Spray Unit and Water
EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not medical...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
1009.7.2 Separation
The fire-resistance-rated construction shall extend vertically from the ground to a point 10 feet (3048 mm) above the floor level of the area for assisted rescue or to the roof line, whichever...
-
4. Getting What You Need During Your Visit
Do you have an exam table that lowers to 18 inches from the floor or lower so that I can get on it independently?...
-
Chapter 6 Addendum: Title II Checklist (Curb Ramps and Pedestrian Crossings)
Any standard curb ramp designs and specifications that your entity, or contractors working for your entity, have used since January 26, 1992....
-
Finding the Perfect Wedding Suits for Women: Tips and Ideas
If you are on the hunt for stunning wedding suits for women, there are so many styles to consider—from traditional embroidered sets to modern chic designs....
-
Vehicle Parking
Design Tip Determine parking requirements for walk-in camping units....
- TOTO Drake® Two-Piece Toilet, 1.6 GPF, ADA Compliant, Elongated Bowl Best Drake 2 Piece ADA Toilet
-
NSS Questions and Concerns
with one end no more than 12 inches from the back wall 33 to 36 inches above the floor?...
-
Additional Number and Types: ADA Standard Section 240.2.1.2
Section 240.2.1.2 covers scoping requirements in the current ADA Standards for additional number and types of ground level play components.
-
11B-240.2.1.2 Additional number and types
Where a large play area includes two or more composite play structures designed for the same age group, the total number of elevated play components on all the composite play structures...
-
11B-232.2 General holding cells and general housing cells
Many detention and correctional facilities are designed so that certain areas (e.g., "shift" areas) can be adapted to serve as different types of housing according to need....
-
11B-201.1 Scope
All areas of newly designed and newly constructed buildings and facilities and altered portions of existing buildings and facilities shall comply with these requirements....
-
11B-221.2.3.2 Vertical dispersion
Designing spectator seating for accessibility can be more complicated when folding bleachers are utilized....
-
11B-221.2.3.2 Vertical dispersion
Designing spectator seating for accessibility can be more complicated when folding bleachers are utilized....
-
11B-240.2.1.2 Additional number and types
Where a large play area includes two or more composite play structures designed for the same age group, the total number of elevated play components on all the composite play structures...
-
11B-201.1 Scope
All areas of newly designed and newly constructed buildings and facilities and altered portions of existing buildings and facilities shall comply with these requirements....
-
11B-232.2 General holding cells and general housing cells
Many detention and correctional facilities are designed so that certain areas (e.g., "shift" areas) can be adapted to serve as different types of housing according to need....
-
11B-224.7 Housing at a place of education
This interpretation encompasses the various designs that may be created for housing units that are housing at a place of education. ◼ ETA Editor's Note From DSA's "Summary of 2022...
-
ASME: ADA Standard Section 105.2.2
Section 105.2.2 of the ADA Standards cover references to the American Society of Mechanical Engineers (ASME) standards.
-
11B-206.2.1 Site arrival points
Department of Transportation and most State departments of transportation are revising their design standards and regulations for the public right-of-way based on recent research and guidelines...