The Standard of Care for healthcare organizations is to have a pressure-relieving surface on the stretcher to help prevent pressure ulcers....
Search Results "Fire and Safety Standard"
-
M301.2.1, M302.2.1 Transfer Height
-
3.3.1 Research Data
Access Board staff to find as many studies as possible that were relevant to various accessibility standards....
-
Effective date: Triggering event. (Section-by-Section Analysis)
The information provided by commenters indicates that the first-use approach would not provide adequate guidance on when the proposed standards would apply to certain facilities and elements...
-
Operable Parts
They also suggested incorporating the provisions of section 309 of the 2010 ADA standards word for word rather than by reference, as well as new requirements to allow at least one mode of...
-
ADA Facilities Compliance Strategies for Private Hospitals
REVIEW - Study all construction and remodeling projects in progress to minimize future problems with “readily achievable” barrier removal and/or failure to meet the “readily accessible” standard...
-
ADA Facilities Compliance Strategies for Private Entities
REVIEW - Study all construction and remodeling projects in progress to minimize future problems with “readily achievable” barrier removal and/or failure to meet the “readily accessible” standard...
-
206.2.3 Multi-Story Buildings and Facilities
Florida requirements may be waived down to the ADA Standards requirements....
-
§35.161 Telecommunication Devices for the Deaf (TDD's) (Section-by-Section Analysis)
The relay services required by title IV would involve a relay operator using both a standard telephone and a TDD to type the voice messages to the TDD user and read the TDD messages to the...
-
409.1 General (Section-by-Section Analysis)
This proposed requirement in 409.1 would be new to the 508 Standards....
-
D. Second Advance Notice of Proposed Rulemaking (2011 ANPRM)
More importantly, we needed to obtain further public comment on major issues and harmonize with the European Commission’s ICT standardization efforts that were already underway at that time...
-
Water Hydrants
Standard handpumps require a force greater than 5 pounds (2.2 newtons) and a long reach to operate....
-
A. Question 1: Applicability of Section 904.4.1’s Exception
service counter be “36 inches (915 mm) high maximum above the finish floor,” and Section 904.4.1 further requires that a sales or service counter be “36 inches (915 mm) long minimum.” 2010 Standards...
-
EXHIBIT A: EDX WEBSITE ACCESSIBILITY POLICY
Guidance on Applying WCAG 2.0 to Non-Web Information and Communications Technologies (“WCAG2ICT”) for non-web software and content; and the Digital Accessibility Information System (“DAISY”) Standard...
-
III-1.7000 Relationship to title II
In cases where the standards differ, the stadium would have to meet the standard that provides the highest degree of access to individuals with disabilities....
-
F - number system
F - number system The F - number system, ASTM E 1155, Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers, was developed primarily to aid in the construction...
-
Knee and Toe Clearance (M303.2.4)
The Access Board is considering requiring in the final standards the dimensions for toe clearance and knee clearance recommended by the Wheeled Mobility Anthropometry Project....
-
A. Statutory and Rulemaking History Up to the 2008 NPRM
Appendix A of the title III regulation, at 28 CFR part 36, contains the ADA Standards for Accessible Design....
-
2. Justification for Applying WCAG 2.0 to Non-Web ICT
We find support for our approach from two other sources, namely the European Commission’s Standardization Mandate M 376 (M376) of March 2012 and the World Wide Web Consortium’s WCAG2ICT...
- Willoughby Industries ASHS-1013-06-15-HC Ligature-Resistant 15" wide Lavatory
- Delta Single Handle Pull-Out Kitchen Faucet 472-DST
- BEST Door Lever Hardware Cylindrical Locks - 5K
- Trimco 1069 Series ADA Pocket Door Pull
- Willoughby Industries DF-1015-96-HC Rear Mounted Drinking Fountain
- Inpro Corporation IPC® Designer Kickplates