The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....
Search Results "Shower Clear Floor Space"
Commonly Searched Documents
-
902.4.2 Height
-
412.3.5 Accessibility
[DSA-AC] In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
-
4.1.3(10)(b)
(b) Where more than one drinking fountain or water cooler is provided on a floor, 50% of those provided shall comply with 4.15 and shall be on an accessible route....
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
HALL CALL CONSOLE
[DSA-AC] An elevator call user interface exclusive to a destination-oriented elevator system that requires the user to select a destination floor prior to entering the elevator car....
-
412.3.8 Accessibility
[DSA-AC] In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab....
-
HALL CALL CONSOLE
[DSA-AC] An elevator call user interface exclusive to a destination-oriented elevator system that requires the user to select a destination floor prior to entering the elevator car....
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-809.10.7.4 Seat height
Water closet seats shall be 15 inches (381 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat above the finish floor....
- Better Living AVIVA Soap Dispenser 1
-
Parking at Residential Facilities
Where parking spaces are provided for each dwelling unit, at least one parking space for each accessible dwelling unit is required to be accessible (208.2.3.1)....
-
Sharing an Access Aisle
Two spaces are permitted to share an access aisle. The proposed rule, consistent with the original ADAAG, allowed access aisles to be provided on either side of the parking space....
- Verifone MX 925 Point of Sale Machine with Credit Card Reader
- Mockett PCS38-94 Clamp-On Power Grommet
-
Section 35.152 Detention and correctional facilities—program requirements (Section-by-Section Analysis)
Based on that review, the Department has found that many detention and correctional facilities have too few or no accessible cells, toilets, and shower facilities to meet the needs of their...
-
Other international standards
TR 34 Concrete Industrial Ground Floors—Specification and Control of Surface Regularity of Free Movement Areas, UK Concrete Society (provides for three classes of industrial surfaces...
-
210 and 504 Stairways
210 and 504 Stairways The 1991 Standards require stairs to be accessible only when they provide access to floor levels not otherwise connected by an accessible route (e.g., where the...
-
1136A.1 Receptacle heights
inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the finished floor...
-
1010.1.7 Thresholds
Thresholds at doorways shall not exceed ¾ inch (19.1 mm) in height above the finished floor or landing for sliding doors serving dwelling units or ½ inch (12.7 mm) above the finished floor...
- Bradley 3 Station Verge Lavatory System LVRD3
-
III-7.4300 Parking
For example, only four percent of the spaces in a 100-space lot must be accessible. Certain facilities, however, are subject to higher requirements....
-
§382.9(d)
provision of this part, and that the carrier has provided an effective alternative means of achieving the objective of the provisions of this part subject to the waiver or have demonstrated by clear...
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...