Mounts centered through toilet partitions, 1/2–2" (12–50mm) thick; used from both sides. Holds four standard core toilet tissue rolls up to 5 1/8" (130mm) diameter; two for each side....
Search Results "Unisex Toilet Room"
-
Bobrick Partition-Mounted Multi-Roll Toilet Tissue Dispenser (Serves 2 Compartments) B-386
-
Signage
Error/Omission: Where permanent room identification signage is provided, it is mounted in the wrong location....
-
11B-219.2 Required systems
An assistive listening system shall be provided in assembly areas, including conference and meeting rooms. [2010 ADA Standards] 219.2 Required Systems....
-
11B-219.2 Required systems
An assistive listening system shall be provided in assembly areas, including conference and meeting rooms. [2010 ADA Standards] 219.2 Required Systems....
-
Gamco Partition Mounted Dual-Sided Multi-Roll Toilet Tissue Dispenser - TTD-7
Mounts centered through toilet partitions, 1/2"-2" (12-50mm) thick; used from both sides....
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
American Specialties Recessed Dual Roll Toilet Paper Holder 74022
Recessed Dual Roll Toilet Paper Holder shall hold and dispense all standard core roll tissue up to 6" diameter (Ø152) roll and shall be fabricated of stainless steel type 304 alloy 18-8....
-
Printable Room Layouts
include layouts as an addendum to your facility contract, provide them in a pre-meeting with facility and banquet staff, and use them with your internal planning team to ensure that your rooms...
-
4.16.6 Dispensers
Few of the respondents specifically addressed the issue of dispensers, even though increasing the distance between the sidewall and the toilet would suggest that locating dispensers on the...
-
American Specialties Dual Roll Surface Mounted Toilet Paper Holder 7305-2
Dual Roll Surface Mounted Toilet Paper Holder unit shall hold and dispense two (2) rolls of standard core roll tissue up to 5- 1/2" (140mm) diameter....
-
9.5.2(2)(c)
(c) at least one toilet room for each gender or one unisex toilet room shall have a minimum clear door width of 32 in (815 mm), minimum turning space complying with 4.2.3, one water closet...
-
4.1.6(3)(h) Dressing Rooms
(h) Dressing Rooms: In alterations where technical infeasibility can be demonstrated, one dressing room for each sex on each level shall be made accessible....
-
11B-604.8 Toilet compartments
Wheelchair accessible toilet compartments shall meet the requirements of Sections 11B-604.8.1 and 11B-604.8.3....
-
Boost Your Business - Chapter 10 - Restroom Fixtures
Boost Your Business - Chapter 10 - Restroom Fixtures
-
Recessed Lavatories
Recessed Lavatories Recessing lavatories can provide space for side transfers while allowing a narrower room width....
-
803.1 General
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General....
-
803.1 General
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General....
-
803.1 General
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General....
-
4.16.6 Dispensers
Toilet paper dispensers shall be installed within reach, as shown in Fig. 29(b). Dispensers that control delivery, or that do not permit continuous paper flow, shall not be used....
-
4.16.6 DISPENSERS
Toilet paper dispensers shall be installed within reach, as shown in Fig. 29(b). Dispensers that control delivery, or that do not permit continuous paper flow, shall not be used....
-
11B-809.10.3 Powder rooms
Powder rooms shall be designed to comply with Sections 11B-809.7, 11B-809.8, 11B-809.10.5.2, 11B-809.10.6.4, 11B-809.10.7.3, and 11B-809.12....
-
11B-803.1 General
Dressing, fitting, and locker rooms shall comply with Section 11B-803. [2010 ADAS] Advisory 803.1 General. ...
-
11B-803.1 General
Dressing, fitting, and locker rooms shall comply with Section 11B-803. [2010 ADAS] Advisory 803.1 General....
