Minimum character height shall comply with Table 703.5.5. Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further...
Search Results "Unisex Toilet Room"
Filters
Commonly Searched Documents
-
Character Height: ADA Standard Section 703.5.5
-
11B-703.5.5 Character height
Minimum character height shall comply with Table 11B-703.5.5. Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing...
-
Construction Sites: ADA Standard Section 203.2
Section 203.2 covers scoping requirements of general exceptions for construction sites in the most current ADA Standards.
-
11B-604.2 Location
the side wall or partition, except that the water closet shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum from the side wall or partition in the ambulatory accessible toilet...
-
11B-612 Saunas and steam rooms
11B-612 Saunas and steam rooms....
-
Turning Space: ADA Standard Section 805.2
Turning space complying with 304 shall be provided within the room....
-
Signage
Error/Omission: Where permanent room identification signage is provided, it is mounted in the wrong location....
-
11B-219.2 Required systems
An assistive listening system shall be provided in assembly areas, including conference and meeting rooms. [2010 ADA Standards] 219.2 Required Systems....
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
Mega Jailhouse Vandal Resistant/Security Toilet Paper Holder
This heavy duty, vandal resistant, stainless steel toilet paper holder is a single incremental unit that cannot be removed or conceal contraband. ...
-
4.16.6 Dispensers
Few of the respondents specifically addressed the issue of dispensers, even though increasing the distance between the sidewall and the toilet would suggest that locating dispensers on the...
-
Printable Room Layouts
include layouts as an addendum to your facility contract, provide them in a pre-meeting with facility and banquet staff, and use them with your internal planning team to ensure that your rooms...
-
9.5.2(2)(c)
(c) at least one toilet room for each gender or one unisex toilet room shall have a minimum clear door width of 32 in (815 mm), minimum turning space complying with 4.2.3, one water closet...
-
AJW Architectural Products U841 Dual Hooded Toilet Tissue Dispenser w/Auto Reserve - Recessed - Non-Controlled
Holds two standard toilet tissue rolls. Secured with pin tumbler lock, keyed like all AJW cabinets....
-
Boost Your Business - Chapter 10 - Restroom Fixtures
Boost Your Business - Chapter 10 - Restroom Fixtures
-
4.1.6(3)(h) Dressing Rooms
(h) Dressing Rooms: In alterations where technical infeasibility can be demonstrated, one dressing room for each sex on each level shall be made accessible....
-
11B-604.8 Toilet compartments
Wheelchair accessible toilet compartments shall meet the requirements of Sections 11B-604.8.1 and 11B-604.8.3....
-
Recessed Lavatories
Recessed Lavatories Recessing lavatories can provide space for side transfers while allowing a narrower room width....
-
4.16.6 Dispensers
Toilet paper dispensers shall be installed within reach, as shown in Fig. 29(b). Dispensers that control delivery, or that do not permit continuous paper flow, shall not be used....
-
4.16.6 DISPENSERS
Toilet paper dispensers shall be installed within reach, as shown in Fig. 29(b). Dispensers that control delivery, or that do not permit continuous paper flow, shall not be used....
-
AJW Architectural Products US11 Security Toilet Tissue Holder, Exposed Mounting - Surface Mounted
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Holds one standard toilet tissue roll Unit is designed for security applications Product Specs...
-
803.1 General
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General....
-
803.1 General
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General....
-
803.1 General
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General....
