SURCHAGES FOR REQUIRED PROVISIONS {35.130} Surcharges on particular individuals with disabilities to cover costs of measures required by the ADA are not allowed....
Search Results "Tape Measure"
-
SURCHARGES FOR REQUIRED PROVISIONS {35.130}
-
d-iii
Is the ramp width, measured between handrails, at least 36 inches? [ADA Standards § 4.8.3] Yes No...
-
f-iii
Is the ramp width, measured between the handrails, at least 36 inches? [ADA Standards § 4.8.3] Yes No...
-
1.2.3 Landings
Both measurements of ramp landings as described in Section 1.1.15 should not exceed a plus tolerance of 0.5%....
-
11B-407.4.8.2.2 Signal level
The verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the annunciator....
-
11B-407.4.8.2.2 Signal level
The verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the annunciator....
-
407.4.8.2.2 Signal Level
The verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the annunciator....
-
Some Examples of Alternative Test Formats and Accommodations
computer for people with visual or other reading disabilities; Allowing people with visual or learning disabilities or who have limited use of their hands to record test answers by tape...
-
3. How and where should the notice be provided?
Examples of Alternative Formats Audio tape or other recordings Radio announcements Large print notice Braille notice Use of a qualified sign language...
-
FOR MORE INFORMATION
For persons with disabilities, this publication is available in large print, Braille, audio tape, and on computer disk. Reproduction of this publication is encouraged....
-
Public Address Systems and Microphones
Recommendations: Both systems can share sound sources (microphones, mixers, tape players, VCRs) but not all microphones of a public address system work well with ALSs....
-
Part 3: Polling Place Accessibility Checklist
In completing the checklist, provide a measurement for every question with a "no" answer....
-
Performance and Productivity
Response by Mariana Figueiro: Measuring productivity is really hard....
-
I. Definitions
. § 35.151) on Election Day, whether such compliance is achieved through permanent architectural measures or through the use of temporary measures such as those provided for in Paragraph...
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
VIII. Existing Facilities: Alternatives to Barrier Removal
Examples of alternative measures include -- Providing goods and services at the door, sidewalk, or curb, Providing home delivery, Retrieving merchandise from inaccessible...
-
1003.2.12.1 Height
Guards shall form a protective barrier not less than 42 inches (1067 mm) high, measured vertically above the leading edge of the tread, adjacent walking surface or adjacent seatboard....
-
T503.5 Exterior Illumination for Boarding and Alighting Areas
Where doorways have steps, the illumination shall be 1 foot-candle (11 lux) minimum for a distance of 3 feet (915 mm) measured beyond the outside edge of the doorway or bottom step tread...
-
1003.2.12.1 Height
Guards shall form a protective barrier not less than 42 inches (1067 mm) high, measured vertically above the leading edge of the tread, adjacent walking surface or adjacent seatboard....
-
D. Signage
Existing tactile signage will be relocated to between 48 inches measured to the baseline of the lowest tactile character and 60 inches measured to the baseline of the highest tactile character...
-
Recreation and Heritage Resources Integrated Business Systems
Compliance with the accessibility guidelines (figure 26) is an important quality measure within the national standards for recreation sites under the responsiveness key measure....
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
609.4 Position of Grab Bars
Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except...