Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
Search Results "Ramp Surface"
-
11B-505.7.1 Circular cross section
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
6e. Ramp Landing
Is a level landing, at least 60 inches by 60 inches, provided where a ramp changes direction? [ADA Stds 4.8.4] Yes _____ No _____...
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
Perpendicular Curb Ramps (R304.2) (Section-by-Section Analysis)
Perpendicular Curb Ramps (R304.2) (Section-by-Section Analysis) Perpendicular curb ramps have a running slope that cuts through or is built up to the curb at right angles or meets the...
-
11B-304.2 Floor or Ground Surfaces
Floor or ground surfaces of a turning space shall comply with Section 11B-302. Changes in level are not permitted. Exception: Slopes not steeper than 1:48 shall be permitted....
-
11B-304.2 Floor or Ground Surfaces
Floor or ground surfaces of a turning space shall comply with Section 11B-302. Changes in level are not permitted. Exception: Slopes not steeper than 1:48 shall be permitted....
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
1132A.9 Smooth surface
1132A.9 Smooth surface. ...
-
Section 35.151(i) Curb ramps (Section-by-Section Analysis)
Section 35.151(i) Curb ramps (Section-by-Section Analysis) Section 35.151(e) on curb ramps in the 1991 rule has been redesignated as § 35.151(i)....
-
302 Floor or Ground Surfaces
[See subsections ...]
-
A4.5 Ground and Floor Surfaces
[See subsections ...]
-
4.5 Ground and Floor Surfaces
[See subsections ...]
-
A4.5 GROUND AND FLOOR SURFACES.
[See subsections ...]
-
4.5 GROUND AND FLOOR SURFACES
[See subsections ...]
-
302 Floor or Ground Surfaces
[See subsections ...]
-
11B-304.2 Floor or ground surfaces
Floor or ground surfaces of a turning space shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted....
-
2.2 Surface
The surface of an ORAR shall be firm and stable. The type of surface should be appropriate to the setting and level of development....
-
Handrails
Handrails Handrails are required on both sides of ramps connecting elevated play components....
-
Handrails Along Walking Surfaces [§403.6, §505]
Handrails Along Walking Surfaces [§403.6, §505] Handrails are required at ramps with a rise greater than 6” and at stairs that are part of a means of egress, but not at other locations...
-
Rockwood Manufacturing Company 702 Handrail Bracket
Specifications: Material: Cast Brass FASTENER: Wood Rail: 3 ea. #12 x 2 FH WS; 2 ea. #8 x 3/4 OH SMS Metal Rail: 3 ea. #12 x 2 FH WS; 2 ea. 8-32 x 3/4 OH SMS Ordering: ...
-
Rockwood Manufacturing Company 700 Handrail Bracket
Material: Cast Brass FASTENER: Wood Rail: 5/16-18 x 1-1/2 FH MS, Lead Anchor; 3 ea. 12-24 x 1 FH MS; 2 ea. #8 x 3/4 OH SMS; 1 ea. Back Plate Metal Rail: 5/16-18 x 1-1/2 FH...
