Section 224.1.1 covers scoping requirements in the current ADA Standards for alterations to transient lodging guest rooms.
Search Results "Patient Room"
Filters
Commonly Searched Documents
-
Alterations: ADA Standard Section 224.1.1
-
5.1.4 Transfer Surface Height Measurement for M301 and M302
Rationale for final recommendation Having an accessible transfer surface height is critical to facilitate independent patient transfers to equipment used by patients both in a supine,...
-
Guest Rooms with Communication Features
Guest Rooms with Communication Features....
-
11B-224.1 General
Hotels, motels, inns, dormitories, resorts and similar transient lodging facilities shall provide guest rooms in accordance with Sections 11B-224.1 through 11B-224.6....
-
Guest Rooms and In-Room Guest Services
Guest Rooms and In-Room Guest Services Orientation to the Room. Guests who are blind or who have low vision should be offered a thorough orientation to their guest rooms....
-
Question 20
Is the required floor and wall space inside public restrooms and fitting rooms blocked by obstacles such as trash cans, chairs, or shelving?...
-
11B-241 SAUNAS AND STEAM ROOMS
[See subsections ...]
-
806 Transient Lodging Guest Rooms
[See subsections ...]
-
806 Transient Lodging Guest Rooms
[See subsections ...]
-
11B-241 Saunas and steam rooms.
[See subsections ...]
-
11B-241 Saunas and steam rooms
[See subsections ...]
-
M301.3.1 Transfer Supports (Section-by-Section Analysis)
The MDE NPRM proposed to require transfer supports to be provided for use with transfer sides on diagnostic equipment used by patients in the supine, prone, or side-lying position, and that...
-
M301.3.3 Head and Back Support (Section-by-Section Analysis)
In the MDE NPRM the Access Board proposed to place the requirements for head and back support for diagnostic equipment used by patients in the supine, prone, or side-lying position in M301...
-
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers. The base of the equipment must provide a clearance of 39 inches wide minimum.
-
5.9.1 Standing Supports Recommendation In Reference To Mammography Equipment
During discussion, there was general agreement that the real use of these supports is for positioning, and thus, not meant to support the full weight of the patient or to keep a patient...
-
General: ADA Standard Section 806.1
Transient lodging guest rooms shall comply with 806. Guest rooms required to provide mobility features shall comply with 806.2....
-
11B-806.1 General
Transient lodging guest rooms shall comply with Section 11B-806. Guest rooms required to provide mobility features shall comply with Section 11B-806.2....
-
Transfer Supports Location and Configuration M301.3 and M302.3
Transfer Supports Location and Configuration M301.3 and M302.3 Location of the transfer supports shall be a minimum of 6 inches to a maximum of 19 inches from the top of the...
-
Gripping Surface Cross Section and Clearances M301, M302, and M305.2
Gripping Surface Cross Section and Clearances M301, M302, and M305.2 Gripping surface for transfer supports shall be free of sharp or abrasive elements and shall have rounded...
-
M301.2.3.1 End Transfer Surface
imaging equipment with bores shall be permitted to be 21 inches (535 mm) wide minimum but shall not be permitted to be less than the full width of the examination surface provided for the patient...
-
M301.2.3.2 Side Transfer Surface
imaging equipment with bores shall be permitted to be 21 inches (535 mm) wide minimum but shall not be permitted to be less than the full width of the examination surface provided for the patient...
-
Healthcare Stories - Karen Schneiderman
Requires the Registered User plan or above. Login! -
Healthcare Stories - Michael Ogg
Requires the Registered User plan or above. Login!
-
Saunas and Steam Rooms
Saunas and Steam Rooms If saunas or steam rooms are in a cluster, at least 5 percent, but not less than one of each type must be accessible....