5.3.2.1 Transfer Sides for Stretchers. The transfer surface shall be located to provide the ability to transfer from a mobility device onto both long sides of the surface.
Search Results "Patient Room"
-
5.3.2.1 Transfer Sides for Stretchers
-
M302.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the...
-
M305.4 Leg Supports (Section-by-Section Analysis)
The MDE NPRM proposed that where stirrups are provided, they must provide a method to support, position, and secure the patients legs....
-
222.2 Coat Hooks and Shelves
Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with 803.5....
-
11B-222.2 Coat hooks and shelves
Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with Section 11B-803.5....
-
11B-222.2 Coat hooks and shelves
Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with Section 11B-803.5....
-
11B-222.2 Coat hooks and shelves
Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with Section 11B-803.5....
-
11B-224.2.2 More than fifty guest room facilities
Facilities with more than fifty guest rooms shall be treated separately for the purposes of determining the required number of accessible rooms and type of accessible bathing facility....
-
Toilet and Bathing Facilities: ADA Standard Section 806.2.4
At least one bathroom that is provided as part of a guest room shall comply with 603....
-
Technical Memorandum TM 2013-10 Clustered Toilet Rooms
TM 2013-10 Clustered Toilet Rooms Effective Date: June 1, 2013 2012 TAS Reference: 213.2, Exception 4 Based on information received from the U.S....
-
5.2.1.1 Transfer Surface Width Recommendations for M301
5.2.1.1 Transfer Surface Width Recommendations for M301 The Committee recommends a transfer surface of 28 inches minimum width for equipment used by patients in a supine, side-lying,...
-
M301.3.2 Stirrups
Where stirrups are provided, they shall provide a method of supporting, positioning, and securing the patient’s legs....
-
Communication Features in Guest Rooms
The Board had proposed increasing the minimum number of such guest rooms to 50% of the total number of guest rooms provided....
-
603 Toilet and Bathing Rooms
[See subsections ...]
-
612 Saunas and Steam Rooms
[See subsections ...]
-
603 Toilet and Bathing Rooms
[See subsections ...]
-
612 Saunas and Steam Rooms
[See subsections ...]
-
603 Toilet and Bathing Rooms
[See subsections ...]
-
11B-216.8 Toilet rooms and bathing rooms
Where existing toilet rooms or bathing rooms do not comply with Section 11B-603, directional signs indicating the location of the nearest toilet room or bathing room complying with Section...
-
Guest Rooms with Mobility Features
Guest Rooms with Mobility Features. Scoping provisions for guest rooms with mobility features are provided in section 224.2 of the 2010 Standards....
-
5.4.1 Transfer Support Location for M301 and M302
Where possible, it is recommended that supports be provided on each side of the transfer surface that is 15 inches deep minimum for patients to maintain position after they have transferred...
-
Armrests M302.3.2
Armrests M302.3.2 Armrests are recommended but not required. If provided armrests cannot interfere with transfer supports during the transfer. Dual transfer support/armrest...
-
Guest Rooms and Residential Dwelling Units: ADA Standard Section 206.7.6
Section 206.7.6 covers scoping requirements in the most current ADA Standards for accessible routes connecting to mobility features in guest rooms and residential dwelling units.
-
M302.1 General
Where diagnostic equipment is used by patients in a seated position, it shall comply with M302....