Deliberate manipulation of the height of the finished floor level to avoid the requirements of the Fair Housing Act would serve as a basis for the Department to determine that there is reasonable...
Search Results "Grade Level Exit"
Commonly Searched Documents
-
12.2 Q. What happens if a builder deliberately manipulates the grade so that a second story, which also might have been treated as a ground floor, requires steps?
- How To Calibrate a Digital Slope Meter
- Husky 10" Multi-Function Standard Digital Level
-
A4.1.3(9)
automatic sprinkler systems have built in signals for monitoring features of the system such as the opening and closing of water control valves, the power supplies for needed pumps, water tank levels...
-
Raised Work Areas (§203.9)
Raised Work Areas (§203.9) Employee work areas under 300 s.f. that are elevated at least 7” as an essential functional condition of the space (excluding raised courtroom...
-
1003.2.13 Accessible means of egress
One accessible means of egress is required from an accessible mezzanine level in accordance with Section 1003.2.13.2 or 1003.2.13.3....
-
11B-504.4 Tread surface
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
-
A. Signs
Comments: ___________________________________________ Mechanical and electrical rooms Yes __ No __ N/A __ Comments: ___________________________________________ Stairways, fire exits...
-
Determine Your Evacuation Options When Traveling
Do you check exit routes on the back of guest room doors and familiarize yourself with the exits (by tracking the escape route, noting the number of doors between your room and the emergency...
-
1007.6.5 Identification
Where exit sign illumination is required by Section 1011.2, the area of refuge sign shall be illuminated....
-
1003.2.13.5.5 Identification
Where exit sign illumination is required by Section 1003.2.10.4, the area of refuge sign shall be illuminated....
-
Installation Height and Location: ADA Standard Section 703.4
Signs with tactile characters shall comply with 703.4.
-
Stroke Thickness: ADA Standard Section 703.5.7
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 30 percent maximum of the height of the character.
-
11B-703.4 Installation height and location
Signs with tactile characters shall comply with Section 11B-703.4.
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADA Standards] 703.5.7 Stroke Thickness....
-
Work Areas [4.1.1(3)]
Note that an accessible route through one work area ("research,") may be needed to provide access to an exit as part of an accessible means of egress....
-
1007.2 Continuity and components
1007.2 Continuity and components. Each required accessible means of egress shall be continuous to a public way and shall consist of one or more of the following components:
-
1009.2 Continuity and components
Each required accessible means of egress shall be continuous to a public way and shall consist of one or more of the following components:
-
2. a. ii. Accessible entrance and exit route
[See subsections ...]
-
§ 35.150(b)(4)(i)
(i) In addition to the provisions of section 240.2.1 of the proposed standards, where an existing play area provides elevated play components, an additional number of ground level play components...
-
§ 38.125(c)(3) Ramp threshold
Changes in level between 1/4 inch and 1/2 inch shall be beveled with a slope no greater than 1:2....
-
Accessible Route to Play Components
Section 206.2.17 of the 2010 Standards provides scoping requirements for accessible routes to ground level and elevated play components and to soft contained play structures....
-
§ 38.95(c)(3) Ramp threshold
Changes in level between 1/4 inch and 1/2 inch shall be beveled with a slope no greater than 1:2....
-
M303.3 Entry
Where there is a change in level at the entry to wheelchair spaces, the change in level shall comply with M303.3....