4.2 Clear Floor Area Figure 9 and Table 3 show the standards from the four countries related to clear floor area. Figures 10-13 show the key findings from the research....
Search Results "Figures"
-
4.2 Clear Floor Area
-
707.6.2 Numeric Keys
Figure 707.6.2 Numeric Key Layout...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
FIGURE 11B-1002.4.4.3 PROTRUSIONS IN WHEELCHAIR SPACES IN AMUSEMENT RIDES...
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
Figure 1002.4.4.3 Protrusions in Wheelchair Spaces in Amusement Rides...
-
11B-1009.3.2 Submerged depth
FIGURE 11B-1009.3.2 SLOPED ENTRY SUBMERGED DEPTH...
-
11B-304.3.2 T-Shaped space
FIGURE 11B-304.3.2 T-SHAPED TURNING SPACE...
-
303.3 Beveled
Figure 303.3 Beveled Change in Level ...
-
604.2 Location
Figure 604.2 Water Closet Location...
-
405.7 Landings
Figure 405.7 Ramp Landings ...
-
304.3.2 T-Shaped Space
Figure 304.3.2 T-Shaped Turning Space...
-
Location of Controls
Comments indicated that this specification was not consistent with a corresponding figure showing the location on the side closest to the shower opening. Response....
-
5.2.2 Transfer Surface Size Recommendations for M302
(See Figure 5.2.1.1) NPRM Proposed Provision: M302.2.2 Size. The transfer surface shall be 21 inches wide minimum and 15 inches deep minimum....
-
11B-610.2 Bathtub seats
FIGURE 11B-610.2 BATHTUB SEATS...
-
2. a. iv. Path-of-Travel (wheelchair) space allowances
If a 180° turn is needed to exit an area, then a 60” diameter turning space or a 36” wide "T" is needed (see Figure 11)....
-
11B-802.1.2 Width
Figure 11B-802.1.2 (b) depicts paired wheelchair spaces requiring a total of 66 inches in width....
-
610.2 Bathtub Seats
Figure 610.2 Bathtub Seats...
-
609.3 Spacing
Figure 609.3 Spacing of Grab Bars...
-
608.3.2 Standard Roll-In Type Shower Compartments
Figure 608.3.2 Grab Bars for Standard Roll-In Type Showers...
-
1009.3.2 Submerged Depth
Figure 1009.3.2 Sloped Entry Submerged Depth...
-
608.2.1 Transfer Type Shower Compartments
Figure 608.2.1 Transfer Type Shower Compartment Size and Clearance ...
-
11B-703.3.2 Position
FIGURE 11B-703.3.2 ‡‡ POSITION OF BRAILLE ETA Editor's Note 2013 CBC Figure 11B-703.3.2 is not intended to suggest that Braille must be multi-lined when the related text is...
-
IMPLICATION OF A 19-INCH MINIMUM STANDARD FOR THE HIGHEST POINT IN THE LOWEST ADJUSTABLE POSITION
First, as depicted in Figure 3, adjustable tables currently on the market generally feature contoured bolsters that provide greater security once an individual is seated or lying on the...
-
Conventions used in this Pocket Guide
In the Table of Contents and Index of Figures, the underlines are omitted, for improved readability....
-
A4.17.3 Size and Arrangement
This section requires use of the 60 in (1525 mm) standard stall (Figure 30(a)) and permits the 36 in (915 mm) or 48 in (1220 mm) wide alternate stall (Figure 30(b)) only in alterations where...