The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground.
Search Results "Abrasive Surface"
Filters
Commonly Searched Documents
-
11B-902.4.2 Height
-
Mirror Height
The guidelines specify that accessible mirrors be mounted so that the bottom edge of the reflecting surface is no higher than 40 inches (603.3)....
-
Development of Surface Roughness Standards for Pathways Used by Wheelchair Users: Final Report
Development of Surface Roughness Standards for Pathways Used by Wheelchair Users: Final Report December 2014 Human Engineering Research Laboratories VA Pittsburgh Healthcare System...
-
Material Characteristics (slide 6)
Matte finishes (slide 6) are always better than specular surfaces or polished granite. And that can be columns, and it can even be lighting fixtures....
-
National Trail Surfaces Study Final Report
National Trail Surface Study Final Report February 2014 Staff Liaison Bill Botten U.S....
-
T302.1 General
Walking surfaces in non-rail vehicles shall comply with T302. EXCEPTION: Walking surfaces on lifts shall not be required to comply with T302....
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
1016.2 Surface
The surface of outdoor recreation access routes, passing spaces, and resting intervals shall be firm and stable....
-
1016.2 Surface
The surface of outdoor recreation access routes, passing spaces, and resting intervals shall be firm and stable....
-
1016.2 Surface
This section requires the surface of outdoor recreation access routes, passing spaces, and resting intervals to be firm and stable....
-
Inpro Corporation JointMaster® 806 Series Floor Expansion Joint Covers
Designed for uneven slab conditions Pre-drilled counter-sunk holes for easy installation Applicable for existing conditions, additions and new construction Anti-slip surface...
-
Allied Industries International, Inc. Eco-Grip® Slip Resistant Safety Flooring
Eco-Grip is an advanced dimension in flooring. After years of development, testing, and commercial use this slip resistant, safety flooring has proven to be the final solution to...
-
Walk-A-Sured Roll-On Anti-Slip Safety Coating System
FEATURES: Easy to use newly developed two-part anti-slip epoxy system for moderate use Simply mix and use 1/4" nap epoxy paint roller to apply Recommended for indoor or...
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
5.1.8 Slope
The slope of the surface of the clear ground space shall not be steeper than 1:48 (2 percent) in any direction....
-
1.1.5
Pervious concrete may also be considered for surfaces that are designed to be nearly level....
-
Abstract
Surfaces research project....
-
1133A.4.1, Item 4
Finished flooring shall be extended to the wall beneath the sink and work surface. Exceptions: 1....
-
Nystrom Building Products MatDesign Roll-Up Mats Vinyl Abrasive Tread Section
Requires the Premium User plan or above. (Login or upgrade your account!) -
Summary of Results
than the other trail segment surface materials....
-
1.1.6
1.1.6 Accessible surfaces should be as smooth as possible....
