Development of Surface Roughness Standards for Pathways Used by Wheelchair Users: Final Report December 2014 Human Engineering Research Laboratories VA Pittsburgh Healthcare System...
Search Results "Abrasive Surface"
Filters
Commonly Searched Documents
-
Development of Surface Roughness Standards for Pathways Used by Wheelchair Users: Final Report
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground.
-
Mirror Height
The guidelines specify that accessible mirrors be mounted so that the bottom edge of the reflecting surface is no higher than 40 inches (603.3)....
-
National Trail Surfaces Study Final Report
National Trail Surface Study Final Report February 2014 Staff Liaison Bill Botten U.S....
-
Material Characteristics (slide 6)
Matte finishes (slide 6) are always better than specular surfaces or polished granite. And that can be columns, and it can even be lighting fixtures....
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
1016.2 Surface
The surface of outdoor recreation access routes, passing spaces, and resting intervals shall be firm and stable....
-
1016.2 Surface
The surface of outdoor recreation access routes, passing spaces, and resting intervals shall be firm and stable....
-
1016.2 Surface
This section requires the surface of outdoor recreation access routes, passing spaces, and resting intervals to be firm and stable....
-
T302.1 General
Walking surfaces in non-rail vehicles shall comply with T302. EXCEPTION: Walking surfaces on lifts shall not be required to comply with T302....
-
Inpro Corporation JointMaster® 806 Series Floor Expansion Joint Covers
Designed for uneven slab conditions Pre-drilled counter-sunk holes for easy installation Applicable for existing conditions, additions and new construction Anti-slip surface...
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
Allied Industries International, Inc. Eco-Grip® Slip Resistant Safety Flooring
Eco-Grip is an advanced dimension in flooring. After years of development, testing, and commercial use this slip resistant, safety flooring has proven to be the final solution to...
-
Walk-A-Sured Roll-On Anti-Slip Safety Coating System
FEATURES: Easy to use newly developed two-part anti-slip epoxy system for moderate use Simply mix and use 1/4" nap epoxy paint roller to apply Recommended for indoor or...
-
5.1.8 Slope
The slope of the surface of the clear ground space shall not be steeper than 1:48 (2 percent) in any direction....
-
1.1.5
Pervious concrete may also be considered for surfaces that are designed to be nearly level....
-
Abstract
Surfaces research project....
-
Nystrom Building Products MatDesign Roll-Up Mats Vinyl Abrasive Tread Section
Requires the Premium User plan or above. (Login or upgrade your account!) -
1133A.4.1, Item 4
Finished flooring shall be extended to the wall beneath the sink and work surface. Exceptions: 1....
-
1.1.6
1.1.6 Accessible surfaces should be as smooth as possible....
-
Summary of Results
than the other trail segment surface materials....
