Exception: The enforcing agency may reduce the size of each required area of refuge to accommodate one wheelchair space that is not less than 30 inches by 48 inches (762 mm by 1219 mm) on floors...
Search Results "Floor Designation"
-
1009.6.3 Size
-
Error/Omission: Adequate maneuvering clearance is not provided at doors, including doors to accessible toilet stalls.
The floor or ground area within the required clearances shall be level and clear. 4.17.5* Doors. Toilet stall doors, including door hardware, shall comply with 4.13....
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
-
1009.6.3 Size
Exception: The enforcing agency may reduce the size of each required area of refuge to accommodate one wheelchair space that is not less than 30 inches by 48 inches (762 mm by 1219 mm) on floors...
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
-
11B-233.3.6 Graduate student and faculty housing at a place of education
including, but not limited to, the provisions in sections 233 and 809. 1) In sleeping rooms with more than 25 beds covered by this part, a minimum of 5% of the beds shall have clear floor...
-
11B-233.3.6 Graduate student and faculty housing at a place of education
including, but not limited to, the provisions in sections 233 and 809. 1) In sleeping rooms with more than 25 beds covered by this part, a minimum of 5% of the beds shall have clear floor...
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
TM 2017-25 Door and Gate Surfaces Effective Date: April 1, 2017 2012 TAS Reference: 404.2.10 404.2.10 requires door and gate surfaces within 10 inches (255mm) of the finish floor...
-
11B-805.7 Built-in cabinets and work surfaces
A 30-inch by 48-inch clear floor space, in compliance with Section 11B-305, shall be centered in front of the display screen....
-
Access to Health Care for People with Disabilities
Ethics Matters: A publication of the Donnelley Family Disability Ethics Program Access to Health Care for People with Disabilities © Rehabilitation Institute of Chicago 2009....
-
2.7 Vehicle and Transportation Systems Accessibility.
Under DOT ADA Title II, Subpart B, and Title III regulations in 49 CFR parts 37 and 38, public entities that provide designated or specified public transportation or intercity or commuter...
-
Architectural Barriers
Removing Architectural Barriers In evaluating what barriers need to be removed, a business should look to the ADA Standards for Accessible Design as a guide....
-
Common Problems Arising in the Installation of Accessible Pedestrian Signals
Common Problems Arising in the Installation of Accessible Pedestrian Signals This technical assistance guide is designed to provide information on common problems that arise in the installation...
-
III. Proposed alternative mechanisms to enhance patient access to diagnostic imaging equipment
These alternative means can take many forms, and their specific designs would need to be worked out with appropriate stakeholders to maximize safety, patient handling, and of course, access...
-
Compliance Problems Due to Lack of Accessibility Guidelines
The Fair Housing Act identifies the ANSI Standard as providing design standards that would achieve compliance with the Act's accessibility requirements....
-
A. Format and Organization
Main section headings are designated by three numbers (e.g., T101, T102, etc.). Under each main section heading, the text of the guidelines is organized by section levels....
-
Trailheads
Design Tip New trail facilities must be accessible even if the trail doesn't comply with Forest Service Trail Accessibility Guidelines....
-
Trail Slopes
To accommodate steep terrain, trails may be designed with shorter segments that have a running slope (grade) and length as shown in table 5....
-
4.3.2 Seat Height
Designing only for WhMD users would cause discomfort and safety problems for too many people....
-
C. Corporate ADA Contact Person, ADA Liaison, and ADA Grievance Procedure
Within sixty (60) days of the effective date of this Agreement, Atlantis will designate or hire a Corporate ADA Contact Person and identify that person to the United States. ...
-
III-6.4000 Alterations: Historic preservation
The decision to use alternative standards for that feature must be made in consultation with the appropriate advisory board designated in ADAAG, and interested persons should be invited...
-
4.4 Knee and Toe Clearances
design features where knee space is provided....
-
Accessible Pittsburgh: The One Step Project
Published on Nov 3, 2014 Accessible Pittsburgh The One Step Project is designed to encourage businesses to remove one step from the entrance to their business making it more accessible...
-
Attorney areas and witness stands. (Section-by-Section Analysis)
courtroom and eliminating the disruption of court proceedings when individuals confront physical barriers; providing an accessible route to the witness stand and attorney area and clear floor...