Partition components at toe clearances shall be smooth without sharp edges or abrasive surfaces....
Search Results "Hybrid Surface System"
-
11B-604.8.1.4 Toe clearance
-
Inpro ENDURANT® Shower Receptors
Key Specifications Solid pour of non-porous, BioPrism® Solid Surface homogeneous material....
-
1007.3.2 Golf Club Reach Range Area
This includes accessible routes provided adjacent to or, where provided, on the playing surface of the hole. Figure 1007.3.2 Golf Club Reach Range Area...
-
1009.4.5 Grab Bars
The top of the gripping surface shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above transfer walls....
-
1003.2.12.2 Opening limitations
From a height of 34 inches (864mm) to 42 inches (1067mm) above the adjacent walking surfaces, a sphere 8 inches (203mm) in diameter shall not pass....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
R310 Passenger Loading Zones (Section-by-Section Analysis)
The access aisle must be marked to discourage parking in the aisle and comply with the technical requirements for surfaces (see R302.7)....
-
Miniature golf courses. (Section-by-Section Analysis)
Specified exceptions apply to accessible routes located on the playing surfaces of holes....
-
Common Use Circulation Paths
There are, however, Exceptions for walking surfaces and ramps in TAS 403.5, 405.5, or 405.8....
-
Miniature golf courses. (Section-by-Section Analysis)
Specified exceptions apply to accessible routes located on the playing surfaces of holes....
-
What do you call a reroute?
Are you significantly changing the overall trail grade, width, or surface, or adding bridges where the trail used to ford streams or rivers?...
-
Measuring instruments and accuracy
Measuring instruments and accuracy There are many instruments that are currently available for measuring distances and angles as well as the surface roughness of accessible elements....
-
Supports (M301.3, M302.3, and M305.2)
As discussed under M301.2.3 and M302.2.3, transfer and positioning supports on the transfer sides of transfer surfaces would have to be capable of being repositioned (e.g., folding armrests...
-
Wikk Industries Inc. Bollard With Push Plate PART#BPR SM AINS 32D (630)
Surface mount with concealed mounting base. Recessed area for N4x4S Surface Mount Box for with 4x4-5 US32D (630). Welded Angle top (front slant-45 degree)....
-
Help America Vote Act of 2002 (HAVA)
HAVA addresses improvements to voting systems and voter access that were identified following the 2000 election. ...
-
4. Coverage of Real-Time Text
At that time, TTYs were the most commonly available text-based system for communicating within a voice communication system....
-
2.4.2 Considerations of Manufacturers in Accessible MDE Design
guide MDE manufacturers in their equipment design include: the nature of the specific diagnostic objective; safety requirements; FDA regulations (specifically 21CFR Part 820 – Quality Systems...
-
11B-216.1 General
It would be extremely rare for parking facilities to have signs relating to toilets, TTYs, assistive listening systems, etc. anyway....
-
11B-704.3 Volume control telephones
Consider compatibility issues when matching an amplified handset with a phone or phone system. Amplified handsets that can be switched with pay telephone handsets are available....
-
11B-704.3 Volume control telephones
Consider compatibility issues when matching an amplified handset with a phone or phone system. Amplified handsets that can be switched with pay telephone handsets are available....
-
11B-216.1 General
It would be extremely rare for parking facilities to have signs relating to toilets, TTYs, assistive listening systems, etc. anyway....
-
502.2.1 User Control of Accessibility Features (Section-by-Section Analysis)
that the Board include an express provision ensuring that persons with disabilities are able to activate and use features or settings—such as font size, or color—that preclude network or system-wide...
-
11B-703.7.2.1 International Symbol of Accessibility
On the accessibility function button on hall call consoles in a destination-oriented elevator system the International Symbol of Accessibility shall be a white symbol on a black background...
-
Signs
Section 216.10 of the 2010 Standards requires each covered assembly area to provide signs at each auditorium to inform patrons that assistive listening systems are available....
