Clear spaces must comply with the technical requirements for surfaces (see R302.7)....
Search Results "Floor Surface"
Commonly Searched Documents
-
R404 Clear Spaces (Section-by-Section Analysis)
-
4.1.2 Number of Wheelchair Seating Spaces
Picnic tables shall have at least one wheelchair seating space for each 24 linear feet (7 linear m) of usable table surface perimeter as shown in table 4.1.2....
-
4.1.6(3)(d)
Passenger Loading Zones, (ii) 4.15, Drinking Fountains and Water Coolers, (iii) 4.25, Storage, (iv) 4.28, Alarms, (v) 4.31, Telephones, (vi) 4.32, Seating, Tables, and Work Surfaces...
-
11B-505.10 Handrail extensions
Handrail gripping surfaces shall extend beyond and in the same direction of stair flights and ramp runs in accordance with Section 11B-505.10. Exceptions: 1. ...
-
5) Mercantile
counter may be lowered, (2) an auxiliary counter may be provided, or (3) equivalent facilitation may be provided by installing a folding shelf on the front of a counter to provide a work surface...
-
11B-505.10 Handrail extensions
Handrail gripping surfaces shall extend beyond and in the same direction of stair flights and ramp runs in accordance with Section 11B-505.10....
-
IDEA Center
For scooters, it could be the outside edge of the device housing, the elbows or the outside surface of the hips or shoulders, if they hung over the housing....
- Mockett PCS38-94 Clamp-On Power Grommet
- Panda S.66 Solid Wood Folding Door System
-
M307 Operable Parts
Patients who are blind or have low vision have difficulty distinguishing a flat membrane button or similar control unless it is tactilely discernible from the surrounding surface and any...
-
Can parking signage height be considered a "safe harbor"?
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign.” ...
- American Standard Cadet 1.6 gpf Right Height Elongated Pressure Assisted Toilet
-
Character Height: ADA Standard Section 703.5.5
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum Character Height 40 Inches...
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 213.2
Section 213.2 covers scoping requirements in the current ADA Standards for toilet rooms and bathing rooms.
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
Re: Service Counters
The intent of this section of the code is to provide not only an accessible counter surface for the disabled to utilize, but also to allow a free flow interaction with an employee on the...
-
205 Operable Parts
by service or maintenance personnel (Exception 1) electrical or communication receptacles serving a dedicated use (Exception 2) certain outlets at kitchen counters (Exception 3) floor...
-
2. What does the ADA require for accessibility of pools?
The Standards also provide technical specifications for when a means of entry is accessible, such as, for pool lifts, the location, size of the seat, lifting capacity, and clear floor space...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Section 11B-306.3.3, Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor...
- Bradley 2-Station Frequency Lavatory System FL-2H & FL-2L
- DORMA 8000 Series Exit Device
- Bradley 1-Station Frequency Lavatory System FL-1H & FL-1L
- Bradley Stainless Steel Single Clothes Hook 917