The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
Search Results "Seat Location"
-
Transfer Height: ADA Standard Section 1002.6.2
-
Can van spaces required for a parking garage be located in a surface lot instead?
Accessible parking, including van spaces, required for one parking facility can be located in another parking facility only where it results in substantially equal or greater access and...
-
American Specialties Folding Shower Seat Model 8206-L 3D Model
Requires the Premium User plan or above. (Login or upgrade your account!) -
American Specialties Folding Shower Seat Model 8205-L 3D Model
Requires the Premium User plan or above. (Login or upgrade your account!) -
III-4.4600 Seating in assembly areas
How many seating locations for persons who use wheelchairs must be provided?...
-
4.6.1 General
Where telescopes or periscopes are provided, no fewer than two telescopes or periscopes shall be provided at each distinct viewing location in a viewing area....
-
AJW Architectural Products U8504 Unidoor Seat Cover Dispenser - Recessed
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Holds 500 seat covers Unit features Uni-door construction Product Specs Body: Fabricated of #22...
-
American Standard Acrylic Seated Safety Shower
Our new Seated Safety Shower fits in the space of a standard bathtub and features an integrated full-size, chair-height seat....
-
221.7 Seating Encircling a Field of Play or Performance
221.7 Seating Encircling a Field of Play or Performance....
-
Transfer Compartments
Seats are required in transfer compartments and roll-in showers in transient lodging guest rooms (608.4)....
-
4.26.3 Structural Strength
The structural strength of grab bars, tub and shower seats, fasteners, and mounting devices shall meet the following specification:...
-
1002.4.7.1 Shoulder-to-Shoulder Seating
1002.4.7.1 Shoulder-to-Shoulder Seating....
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat....
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat....
-
Seating [4.32.2] and Knee Clearance [4.32.3]
Seating [4.32.2] and Knee Clearance [4.32.3] Knee space at least 27 inches high is required for a depth of 19 inches....
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.5.2
Section 608.5.2 covers the current ADA Standards for controls in standard roll-in type shower compartments.
-
1002.4.7.1 Shoulder-to-Shoulder Seating
Where an amusement ride provides shoulder-to-shoulder seating, companion seats shall be shoulder-to-shoulder with the adjacent wheelchair space....
-
1002.4.7.1 Shoulder-to-Shoulder Seating
Where an amusement ride provides shoulder-to-shoulder seating, companion seats shall be shoulder-to-shoulder with the adjacent wheelchair space....
-
11B-608.5.2 Standard roll-in type shower compartments
In standard roll-in type shower compartments, the controls, faucets, and the shower spray unit shall be located on the back wall of the compartment adjacent to the seat 16 inches (406 mm...
-
11B-608.5.2 Standard roll-in type shower compartments
In standard roll-in type shower compartments, the controls, faucets, and the shower spray unit shall be located on the back wall of the compartment adjacent to the seat 16 inches (406 mm...
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.3.2
Section 608.3.2 covers the current ADA Standards for grab bars in standard roll-in type shower compartments.
-
Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices: ADA Standard Section 206.2.9.2
Section 206.2.9.2 covers the ADA Standards for accessible routes to wheelchair spaces, ride seats designed for transfer and transfer devices in amusement rides.
-
4.26.3(4)
(4) Tensile force induced in a fastener by a direct tension force of 250 lbf (1112N) plus the maximum moment from the application of 250 lbf (1112N) shall be less than the allowable...
-
4.26.3(3)
(3) Shear force induced in a fastener or mounting device from the application of 250 lbf (1112N) shall be less than the allowable lateral load of either the fastener or mounting...
