., lever, pull, push, panic bar) usable with one hand, without tight grasping, pinching, or twisting of the wrist, to allow people who may not be able to easily use one or both hands to...
Search Results "Push Plate"
Filters
Commonly Searched Documents
-
g-ii
-
10.3.1(16)
At the top and bottom of each escalator run, at least two contiguous treads shall be level beyond the comb plate before the risers begin to form....
-
§ 38.83(a)(2) Exception
If lifts, ramps or bridge plates meeting the requirements of this section are provided on station platforms or other stops required to be accessible, or mini-high platforms complying with...
-
Kickplates
Kickplates Recommendation: Some people with disabilities may use walkers or wheelchair footrests to push through doors, particularly those with closers....
-
1134A.5, Item 3
Lever operated, push type and electronically controlled mechanisms are examples of acceptable designs....
-
1134A.5, Item 3
Lever operated, push type and electronically controlled mechanisms are examples of acceptable designs....
-
AJW Architectural Products U711 Series 16"W x 20"H Channel Frame Mirror - Plate Glass Surface
Mirror is coated with silver and sealed with a uniform electrolytic copper plating, along with two coats of paint for added protection....
-
1134A.6, Item 6
Lever operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
-
1134A.6, Item 6
Lever operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
-
Visually IMpaired Accessible Keypad Door Lock
Ran into an interesting issue in a claim by a visually impaired plaintiff The claim was that the push button keypad was not accessible for a visually impaired person - see attached photo...
-
Restrooms Main Lobby
The force required to push or pull open the interior hinged doors to the restroom vestibule door is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf....
-
Handrail Extensions
Handrail extensions are not required where gangways and transition plates connect and both are provided with handrails....
-
11B-411.2.3.2 Car designation signs
Applied plates are acceptable if they are permanently fixed to the jamb....
-
AJW Architectural Products U700 Series 16"W x 20"H Angle Frame Mirror - Plate Glass Surface
Mirror is coated with silver and sealed with a uniform electrolytic copper plating, along with two coats of paint for added protection....
-
1008.1.9.7, Item 5
A sign shall be provided on the door located above and within 12 inches (305 mm) of the release device reading: “KEEP PUSHING....
-
Doorbell Factory Medium Rectangle Stainless Steel Doorbell
Solid 3/16" thick Stainless Steel Plate Comes with non-lighted stainless steel push button and mounting screws Measures 2" W X 4" H Usually ships in 1-3 business...
-
404.2.9 Door and Gate Opening Force
The force for pushing or pulling open a door or gate other than fire doors shall be as follows: 1. Interior hinged doors and gates: 5 pounds (22.2 N) maximum. 2....
-
§ 38.83(a)(1) General
., lift, ramp or bridge plate) complying with either paragraph (b) or (c) of this section and sufficient clearances to permit at least two wheelchair or mobility aid users to reach areas...
-
Morgan’s Inspiration Island - San Antonio, Texas
Morgan’s Inspiration Island has PneuChairs™ available on a first-come, first-served basis, along with two other waterproof wheelchair models – a push-stroller type for guests needing assistance...
-
A4.13.9 DOOR HARDWARE
Some disabled persons must push against a door with their chair or walker to open it....
-
Is latch-side maneuvering clearance as specified in the Standards applicable to doors with panic bars?
When latch-side clearance is required as part of the maneuvering clearances specified for a door, including on the push side of doors with a forward approach that have both a closer and...
-
1133A.6 Kitchen sink faucet controls
Lever-operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
-
1133A.6 Kitchen sink faucet controls
Lever-operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
