In a national survey of people with disabilities or activity limitations, wheelchair users reported the following: 69% had difficulty using exam tables; 60% had difficulty...
Search Results "Exam Table"
Filters
Commonly Searched Documents
-
3. Getting Access to Medical Equipment
-
Examples of access:
Exam table that lowers to 17-19 inches from the floor Many people find these tables easier to use. There are many ways to help people get access....
-
Clear Floor and Turning Space Inside Examination Rooms
The exam table must have sufficient clear floor space next to it so that an individual using a wheelchair can approach the side of the table for transfer onto it....
-
4.1.3 Adjustable Height Chairs with and without Footplates
, reducing the distance between the floor and seat height may also restrict the overall length of the table when the patient is reclined into a supine position....
-
Additional Transfer Techniques: Use of Stretchers and Gurneys
Other equipment may be located in spaces with no room at the end of the table making it impossible to position a portable floor lift....
-
11B-805 Medical care and long-term care facilities
SECTIONS 11B-805 Medical care and long-term care facilities 11B-805.4.1 Beds, exam tables, procedure tables, gurneys and lounge chairs....
-
Brewer Assist Power Procedure Table™
Brewer Assist Power Procedure Table™...
-
General: ADA Standard Section 902.1
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
-
R212.4 Tables
R212.4 Tables. At least 5 percent, but no less than one, of tables at each location shall comply with section 902 of Appendix D to 36 CFR part 1191....
-
Picnic Tables
Measure table clearance from the table seat out. You may reduce the table clear space to 36 inches (915 millimeters) if there is a condition for an exception....
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground....
-
Figure M2: M301.4 Lift Compatibility
(at Diagnostic Equipment for Use by a Patient in a Supine, Prone, or Side-Lying Position)
-
11B-902.1 General
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
-
M301.4.2 Clearance Around Base (Section-by-Section Analysis)
One commenter recommended clarifying that the exam table must be compatible with a patient lift and meet the six-inch clearance, but not when the table is at its lowest level for independent...
-
Play Tables: ADA Standard Section 1008.4.3
Where play tables are provided, knee clearance 24 inches (610 mm) high minimum, 17 inches deep (430 mm) minimum, and 30 inches (760 mm) wide minimum shall be provided....
-
36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment - Example Applications of Proposed Standards
Example Applications of the Proposed Medical Diagnostic Equipment Accessibility Standards January 23, 2012
-
Transfer Surface Size – M301.2.2 Supine, Prone, or Side-Lying Position
Transfer Surface Size – M301.2.2 Supine, Prone, or Side-Lying Position The issues were discussed and decided in the full committee meeting as follows: depth of 17 inches minimum...
-
Height: ADA Standard Section 902.4.2
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....
-
Defining and Delivering Disability-Competent Care - The Lived Experience Of Disability
This is the second webinar in Webinar Series #1, "Leading Healthcare Practices and Training: Defining and Delivering Disability-Competent Care". The objective of this webinar was to...
-
Dining Surfaces and Work Surfaces: ADA Standard Section 902
[See subsections ...]
-
Dining Surfaces and Work Surfaces: ADA Standard Section 226
Section 226 covers scoping requirements in the current ADA Standards for dining surfaces and work surfaces.
-
11B-226 Dining surfaces and work surfaces
[See subsections ...]
-
11B-902 Dining surfaces and work surfaces
[See subsections ...]
-
Height: ADA Standard Section 902.3
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground.
