No fewer than one water closet, one lavatory, and one bathtub or shower shall comply with applicable requirements of Sections 11B-603 through 11B-610....
Search Results "State Requirement"
-
11B-806.2.4 Toilet and bathing facilities
-
11B-206.7.6 Guest rooms and residential dwelling units
Platform lifts shall be permitted to connect levels within transient lodging guest rooms required to provide mobility features complying with Section 11B-806.2 or residential dwelling units...
-
Accessible Teeing Grounds, Putting Greens, and Weather Shelters
A commenter supported requirements for teeing grounds, particularly requirements for accessible teeing grounds, noting that accessible teeing grounds are essential to the full and equal...
-
11B-206.4.10 Medical care and long-term care facilities
The code does not require more than one entrance with these features. 1. ...
-
11B-206.4.10 Medical care and long-term care facilities
The purpose of this requirement is to permit a person to exit a vehicle and enter the building under cover....
-
Salsbury Industries See Through Metal Locker Six Tier Box Style Bridge 16 Box
Requires the Registered User plan or above. Login! -
Salsbury Industries Solid Oak Executive Wood Locker
Requires the Registered User plan or above. Login! -
The Challenges EV Charging for People with Disabilities
The user extends the cable to the required length (up to 18 feet) and plugs it into the vehicle....
-
11B-802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
Communication Features in Guest Rooms
Guest rooms required to have accessible communication features are required to have visual alarms....
-
802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
235 and 1003 Recreational Boating Facilities
235 and 1003 Recreational Boating Facilities These sections require that accessible boat slips and boarding piers be provided....
-
219 Assistive Listening Systems
This section covers requirements for assistive listening systems and receivers in assembly areas....
-
M305.2 Transfer Supports (Section-by-Section Analysis)
(Significant Changes – Transfer Supports), the Access Board strengthened the transfer support requirements and added additional requirements in the final rule to ensure that supports are...
-
802.1.5 Overlap
The term "circulation paths" used in Section 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
503.1 General (Section-by-Section Analysis)
The proposed requirements in this section are separate from, and in addition to, any required conformance to WCAG 2.0 success criteria that may be otherwise required under the proposed 508...
-
4.7.1 General
All utilities required to be accessible shall be connected to an ORAR complying with section 2.0. Exception....
-
2.3.2
The acceptable tools should be selected based on the accuracy required and a reasonable balance between the accuracy of the tool and the time, cost, and experience required for measurement...
-
1133A.4.1, Item 4
Stone, cultured stone and tiled countertops may be used without meeting the repositioning requirements. 2....
-
11B-802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
§ 38.125(a)(2) Exception
If level-entry boarding, portable or platform lifts, ramps or bridge plates meeting the applicable requirements of this section are provided on station platforms or other stops required...
-
11B-612.2 Bench
Doors shall not swing into the clear floor space required by Section 11B-903.2....
-
§ 38.95(a)(2) Exception
If level-entry boarding, portable or platform lifts, ramps or bridge plates meeting the applicable requirements of this section are provided on station platforms or other stops required...
-
New and Altered Permanently Installed Amusement Rides
Section 234 of the 2010 Standards sets out scoping requirements and section 1002 sets out the technical requirements for the accessibility of permanently installed amusement rides....
