Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor....
Search Results "Shower Clear Floor Space"
Filters
Commonly Searched Documents
-
611.4 Height
-
4(5)
(5) Exterior deck, patio, or balcony surfaces are no more than 1/2 inch below the floor level of the interior of the dwelling unit, unless they are constructed of impervious material such...
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
E2-1. Pedestrian Routes
pedestrian routes leading to or serving the voting area free of objects that protrude from the side more than 4 inches into the route with the bottom of the object more than 27 inches above the floor...
-
4.5.3* CARPET
If carpet or carpet tile is used on a ground or floor surface, then it shall be securely attached; have a firm cushion, pad, or backing or no cushion or pad; and have a level loop, textured...
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
-
11B-603.4 Coat hooks, shelves and medicine cabinets
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
11B-504.4.1 Contrasting stripe
Interior stairs shall have the upper approach and lower tread marked by a stripe providing clear visual contrast....
-
Panda S.51 All Aluminum Folding Door System
outdoors or acting as an interior space divider....
-
Landings [§405.7]
Intermediate landings between runs must be at least 60” wide clear and 60” long clear where ramps change direction (any change from linear)....
-
Bradley 3-Station Express Crescent Lavatory System CRS-3
Resistant Terreon or TerreonRE Solid Surface Material, available in dozens of colors Battery or AC Powered IR Control Optional access panel/ trap cover and soap valves Standard lavatory spacing...
-
Allowances for Typical Roadway Geometry
The cross slope of curb ramps, blended transitions, and turning spaces at pedestrian street crossings without yield or stop control where vehicles can proceed through the intersection without...
-
LaCantina Contemporary Clad Slider System
NFRC Rating | Thermal Performance TYPE OF GLASS (1 LITE) U-FACTOR SHGC ARGON FILLED Clear-Argon-Clear...
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
Advent Reo Interior Wall Sconce
Embossed stainless steel-linear and crosshatch face plate option adds a unique, metal accent and texture to a space....
-
Parking for Guests, Employees, and Other Non-Residents: ADA Standard Section 208.2.3.3
Section 208.2.3.3 covers scoping requirements in the current ADA Standards for accessible parking for guests, employees, and other non-residents.
-
Width: ADA Standard Section 503.3.1
Section 503.3.1 covers the current ADA Standards for the required width of access aisles at passenger loading zones.
-
CHILDREN’S USE
[DSA-AC] Describes spaces and elements specifically designed for use primarily by people 12 years old and younger....
-
11B-503.3.1 Width
Access aisles serving vehicle pull-up spaces shall be 60 inches (1524 mm) wide minimum....
-
ADA Now - Online Quarterly Newsletter from the ACTCP
Summarize regulations in clear and straightforward language, providing examples and illustrations....
-
405.7.4 Change in Direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum....
-
Signage
• Precise directional and informational signage in high-contrast colors with clear, large type and good lighting make shopping more comfortable for people with diminished short-term memory...
-
Printed materials
• Printed programs, advertisements, and brochures with large, clear type, in high contrast colors on solid backgrounds on satin- or matte-finish paper are more legible for people with...
-
R407.6.4 Change in Direction
Ramps that change direction between runs at landings shall have a clear landing 1.5 m (5.0 ft) minimum by 1.5 m (5.0 ft) minimum....
