Section 305.2 covers the current ADA Standards for floor or ground surfaces of clear floor or ground space.
Search Results "Cross Slope"
Commonly Searched Documents
- 
    
  
  Floor or Ground Surfaces: ADA Standard Section 305.2
  
 - Designing Sidewalks and Trails for Access, Part I of II: Review of Existing Guidelines and Practices
 - 
    
  
  Exterior Routes
  
303.4 Abrupt changes in level exceeding 4 inches, vertical dimension shall be identified by warning curb. 11B-303.5 Running and cross...
 - 
    
  
  Exterior Routes
  
303.4 Abrupt changes in level exceeding 4 inches, vertical dimension shall be identified by warning curb. 11B-303.5 Running and cross...
 - 
    
  
  1.1.15 Flatness of ramp landings
  
Edges of the ramp landing should coincide with the cross slope measurements as described in Section 1.1.12....
 - 
    
  
  Wading pools. (Section-by-Section Analysis)
  
Almost all commenters felt that during alterations a sloped entry should be provided unless it was technically infeasible to do so....
 - 
    
  
  Location
  
Location Pushbutton-integrated APS rely on relative proximity to the crossing location, not on difference in sounds, to clarify which street crossing is being signaled....
 - 
    
  
  Are side flares required at curb ramps?
  
The ADA Standards do not require that curb ramps have side flares, but limit the slope (1:10 max.) where they are provided....
 - 
    
  
  1018.4 Clear Width
  
EXCEPTION: At dune crossings, the clear width of beach access routes that are not removable shall be permitted to be reduced to 48 inches (1220 mm) minimum....
 - 
    
  
  6.6 Clear Width
  
Exception: At dune crossings, the clear width of beach access routes that are not removable shall be permitted to be reduced to 48 inches (1220 mm) minimum....
 - 
    
  
  1018.4 Clear Width
  
EXCEPTION: At dune crossings, the clear width of beach access routes that are not removable shall be permitted to be reduced to 48 inches (1220 mm) minimum....
 - 
    
  
  503.4 Floor and Ground Surfaces
  
EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
 - 
    
  
  11B-503.4 Floor and ground surfaces
  
Exception: Slopes not steeper than 1:48 shall be permitted...
 - 
    
  
  11B-503.4 Floor and ground surfaces
  
Exception: Slopes not steeper than 1:48 shall be permitted....
 - 
    
  
  503.4 Floor and Ground Surfaces
  
[ECTCR UFAS 4.6.5] EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
 - 
    
  
  Do the surface requirements, including those for maximum slope (1:48), apply to all portions of a parking lot?
  
No, the surface criteria apply only to accessible parking spaces, access aisles, and accessible routes, including those serving other elements or spaces besides parking spaces....
 - 
    
  
  503.4 Floor and Ground Surfaces
  
EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
 - 
    
  
  2.4.1.1
  
The running slope (grade) of an ORAR shall be 1:20 (5 percent) or less for any distance. ...
 - 
    
  
  Q11: Utility Trench Work and Curb Ramp Compliance
  
If the utility work impacts the curb at a pedestrian street crossing where no curb ramp exists, the work affecting the curb falls within the definition of "alteration," and a curb ramp must...
 - 
    
  
  Appendix 1: ADA Accessibility Survey Instructions: Curb Ramps
  
[See subsections ...]
 - How To Calibrate a Digital Slope Meter
 - 
    
  
  3. Exception to Ramp Running Slope
  
The maximum slope for a ramp in the 2010 Standards is a rise of 1 vertical inch for each 12 inches of horizontal distance slope....
 - 
    
  
  Problem Three
  
Problem Three: Accessible parking spaces or access aisles are on a sloped surface. Suggestion: Find a parking area that is close to the accessible entrance and more level....
 - 
    
  
  7.4.11.1 Clear Space
  
The slope of the clear space shall not exceed 1:20 (5 percent) in any direction....