Elevator cars shall provide a clear width 42 inches (1067 mm) minimum and a clear depth 54 inches (1372 mm) minimum....
Search Results "Lavatory Clear Floor Space"
-
11B-408.4.1 Car dimensions and doors
-
Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
11B-809.8 Doors
The floor or landing at primary entry doors, required exit doors, and secondary exit doors where a change in elevation occurs between the interior and the exterior surface of the floor or...
-
233 Residential Facilities
(1) In sleeping rooms with more than 25 beds covered by this section, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3 of the 2010 Standards....
-
H. Your Obligation to Provide Services and Equipment
[Sec. 382.39(a)(1)] Aircraft with more than 60 passenger seats having an accessible lavatory must be equipped with an operable on-board wheelchair....
-
206.2.3 Multi-Story Buildings and Facilities
Spaces and elements located on a level not required to be served by an accessible route must fully comply with this document....
-
Trail Facilities
For example, if a camp shelter is provided along a trail and its floor is above the ground, all hikers must be able to get inside the shelter....
-
Can parking signage height be considered a "safe harbor"?
ceilings so that it is not obscured by vehicles parked in the space....
-
Smith System Trespa Planner Science Table 30″ Deep 11288
Its Trespa TopLab Plus work surface is designed for maximum durability and provides ample space for projects of all kinds. Supports up to 400 lbs....
-
Fur out the wall
Don't cut the concrete or flooring or move plumbing. Just need to make sure all other clearances, (42" from center line to adjacent wall/fixture is clear, etc.) ...
-
Parking: ADA Standard Section 216.5
Section 216.5 covers scoping requirements in the current ADA Standards for signs at parking.
-
11B-604.7 Dispensers and disposal units
Combination accessory units are not permitted to encroach into the space required by Section 11B-609.3. ...
-
Location: ADA Standard Section 407.2.1.4
Section 407.2.1.4 covers the current ADA Standards for the location of elevator call controls.
-
11B-405.9.2 Curb or barrier
A curb or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground...
-
11B-405.9.2 Curb or barrier
A curb or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground...
-
Trailhead Information Signs [F216.13 and 1017.10]
Section F205 of the ABA Standards requires operable parts in accessible spaces to comply with the technical requirements for operable parts in section 309 of the ABA Standards, including...
-
ADDITION
[DSA-AC] An expansion, extension or increase in the gross floor area or height of a building or facility....
-
ADDITION
[DSA-AC] An expansion, extension or increase in the gross floor area or height of a building or facility....
-
F. Shelter Environment
Hazards posed by protruding and overhead objects can typically be eliminated by placing a cane-detectable barrier on the floor beneath or next to them....
-
Public Way
other parcel of land open to the outside air leading to a public street, which has been deeded, dedicated or otherwise permanently appropriated to the public for public use and which has a clear...
-
Operable Parts: ADA Standard Section 707.3
Unless a clear or correct key is provided, each operable part shall be able to be differentiated by sound or touch, without activation. , EXCEPTION: Drive-up only automatic teller machines...
-
Protruding Objects
When people who are blind or who have vision loss use a cane to detect hazards, only objects located at 27 inches above the floor or ground or lower are detectable....
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4....
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4....
