(1) The sink and surrounding counter shall be mounted at a maximum height of 34 in (865 mm) above the floor, measured from the floor to the top of the counter surface, or shall be adjustable...
Search Results "Lavatory Clear Floor Space"
Filters
Commonly Searched Documents
-
4.34.6.5(1)
-
Car Controls
...are the highest floor control buttons in the elevator(s) mounted within 54" of the floor, with associated raised letters and Braille characters?...
-
5c.
Are the highest floor control buttons in the elevator cab mounted no more than 54 inches above the floor for a side reach or 48 inches for forward reach? Yes _____ No _____...
-
Engineered Wood Fiber
The accessibility standards require the minimum 30 x 48 inch clear floor space for transfer to/from the accessible play components have a level surface with less than a 2.08 percent cross...
-
Seton Economy Braille Signs - Men's Restroom with ISA
Injection molded plastic signs feature easy-to-read messages, clear graphics and Grade 2 Braille Signs measure 6"W x 9"H x 1/8" Available in Gray or ADA Blue Double-sided tape...
-
Seton Economy Braille Signs - Women's Restroom with ISA
Injection molded plastic signs feature easy-to-read messages, clear graphics and Grade 2 Braille Signs measure 6"W x 9"H x 1/8" Available in Gray and ADA Blue Double-sided tape...
-
TTYs
specifications include a requirement that the operable parts of both the TTY and the telephone be accessible according to section 309, which specifies accessible reach ranges, and provide clear...
-
A. Question 1: Applicability of Section 904.4.1’s Exception
Section 904.4.1 and its exception both require that a sales or service counter be “36 inches (915 mm) high maximum above the finish floor,” and Section 904.4.1 further requires that a sales...
-
Transfer Sides (M301.2.3 and M302.2.3)
Enforcing authorities may specify the clear floor space to be provided adjacent to the transfer sides of equipment in health care facilities....
-
4.8.4(2)
(2) The landing length shall be a minimum of 60 in (1525 mm) clear....
-
Residential Facilities: ADA Standard Section 208.3.2
Section 208.3.2 covers scoping requirements in the current ADA Standards for the location of parking spaces in residential facilities.
-
M21
If a coat hook is provided, is it mounted no higher than 54 inches above the floor for a side approach or 48 inches above the floor for a front approach?...
-
Inclusion Solutions Paint Marking Stick
Temporary paint use only Blue, white or yellow paint available (please specify color when ordering) Parking stop clearly defines parking space for temporary or permanent...
-
Initial Measures and Transfer Setup
The device seat to floor height was measured as the linear distance between the front of the seat, center-line point on top of the cushion (if present) and the floor (Figure 3 left). ...
-
Activar JL Industries 1900 Series Dual AED & Emergency Oxygen Recessed or Surface-Mounted Cabinet
Trim Construction: CRS with white powder-coat finish, #4 brushed stainless steel or clear anodized aluminum. 1-3/4” trim on face....
-
Tenon LLC
Remediate Issues When issues are found, Tenon helps turn internet noise into clear guidance so that you can get on with your work....
-
11B-1009.2.6 Footrests and armrests
The armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised position. [2010 ADAS] 1009.2.6 Footrests and Armrests. ...
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
11B-1009.2.6 Footrests and armrests
The armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised position. [2010 ADAS] 1009.2.6 Footrests and Armrests....
-
11B-1009.2.6 Footrests and armrests
The armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....
-
11B-404.2.7 Door and gate hardware
Operable parts of such hardware shall be 34 inches (864 mm) minimum and 44 inches (1118 mm) maximum above the finish floor or ground....
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not displaying...
-
Magnuson Group 1000 Series Magazine Racks
This series is available in one, three, four, and seven pocket configurations with solid painted pockets or clear acrylic fronts....
-
e-iv
Are the highest floor control buttons mounted no more than 54 inches above the floor for a side reach or 48 inches for forward reach? [ADA Standards § 4.10.12 (3)] Yes No...
