The toll free telephone hotline system that provides general information about the rights of air travelers with disabilities, responds to requests for information, and assists air travelers...
Search Results "Hybrid Surface System"
-
DOT Disability Hotline or Hotline:
-
12147(b)(2)(B) Extension for extraordinarily expensive structural changes
extraordinarily expensive structural changes The Secretary may extend the 3-year period under subparagraph (A) up to a 30-year period for key stations in a rapid rail or light rail system...
-
4.3.11.1(7)
Such pressurization system shall be activated by smoke detectors on each floor located in a manner approved by the appropriate local authority....
-
11B-806.3.2 Notification devices
Telephones shall have volume controls compatible with the telephone system and shall comply with Section 11B-704.3....
-
11B-806.3.2 Notification devices
Telephones shall have volume controls compatible with the telephone system and shall comply with Section 11B-704.3....
-
4. Organization of Technical Criteria
For example, X-ray equipment that is designed for use in a standing position for certain procedures would have to meet the technical criteria for slip resistant standing surface and standing...
-
218 and 810 Transportation Facilities
Detectable warnings provide a distinctively textured surface of truncated domes....
-
Scoping [4.1.2(1), 4.1.3(1)] and Location [4.3.2]
Clear width, surface texture, running and cross slope, and the treatment of changes in level help determine the usability of walking surfaces by people with mobility impairments....
-
1016.5 Obstacles
The vertical alignment of joints in concrete, asphalt, or board surfaces on outdoor recreation access routes can be obstacles....
-
Purpose of the project
For instance, when this project began, tolerances for the measurement of the slope, flatness, and smoothness of exterior walking and rolling surfaces in concrete, asphalt, unit masonry,...
-
Clearance Around Base (M301.4.2 and M302.4.2)
M302.4.2 would require the base of the equipment to provide a clearance 6 inches high minimum measured from the floor and 36 inches deep minimum measured from the edge of the examination surface...
-
§ 38.159(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches (32 mm) and 11/2 inches (38 mm) or shall provide an equivalent grasping surface, and have eased edges with corner radii...
-
§ 38.29(b)
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
- Pilot Rock FSW-30 Campfire Ring
- Allegion Von Duprin 98/99 Series Exit Devices
- Kawneer North America 2000T Terrace Doors
-
Elevated Play Components: ADA Standard Section 240.2.2
Section 240.2.2 covers scoping requirements in the current ADA Standards for elevated play components.
-
Volume Control Telephones: ADA Standard Section 704.3
Consider compatibility issues when matching an amplified handset with a phone or phone system. Amplified handsets that can be switched with pay telephone handsets are available....
-
Best Practices
Surface conditions, slopes, landings and detectable warnings are all rated using a 1-5 system, and the data is entered into the city geographic information system (GIS)....
-
Emergency Evacuation Devices
These chairs are designed to travel down stairs on special tracks with friction braking systems, rollers or other devices to control the speed of descent....
-
505.10.2 Top Extension at Stairs
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
410 Platform Lifts
Section 410 provides requirements for platform lifts and addresses floor surfaces, clear floor space, operable parts, and doors and gates....
-
1011.4.2 Wheelchair Space
Picnic tables shall provide at least one wheelchair space for each 24 linear feet (7320 mm) of usable table surface perimeter. ...
-
7(2)(b)(iv)
The other (non-grab bar) side of the toilet fixture is a minimum of 1'3" from the finished surface of adjoining walls, vanities or from the edge of a lavatory. (See Figure 7(a).)...