When greater distances are required for transfer, consideration should be given to providing gripping surfaces, seat paddings, and avoiding sharp or protruding objects....
Search Results "Hybrid Surface System"
Filters
Commonly Searched Documents
-
Amusement Ride Seats Designed for Transfer
-
1007.3.2 Golf Club Reach Range Area
This includes accessible routes provided adjacent to or, where provided, on the playing surface of the hole....
-
Tent Pads and Tent Platforms [1013]
Tent pads and tent platforms are defined spaces with prepared surfaces for setting up and securing tents....
-
Curb Ramps and Blended Transitions (R309.4) (Section-by-Section Analysis)
Detectable warning surfaces are not required on curb ramps and blended transitions that connect the access aisle to the sidewalk, including where the sidewalk is at the same level as the...
-
F. Check-In Areas
If a permanent reception counter is used for check in, make sure to provide a writing surface at an accessible height for people who use a wheelchair, scooter, or other mobility device....
-
4.6.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
1013.1 General
Tent pads and tent platforms are defined spaces with prepared surfaces for setting up and securing tents....
-
§ 38.159(b)(7) Platform gaps
Any openings between the platform surface and the raised barriers shall not exceed 5/8 inch (16 mm) in width....
-
11B-406.5.12 Detectable warnings
width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum measured from the back of the curb on the ramp surface...
-
11B-1007.3.2 Golf club reach range area
This includes accessible routes provided adjacent to or, where provided, on the playing surface of the hole. ...
-
11B-406.5.12 Detectable warnings
width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum measured from the back of the curb on the ramp surface...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-1007.3.2 Golf club reach range area
This includes accessible routes provided adjacent to or, where provided, on the playing surface of the hole. ◼ ...
-
11B-705.1.2.3 Islands or cut-through medians
cut-through less 2 inches (51 mm) maximum on each side, placed at the edges of the pedestrian island or cut-through median, and shall be separated by 24 inches (610 mm) minimum of walking surface...
-
Tork Toilet Seat Cover Dispenser
Product Data System - V1 - toilet seat cover system Material - Plastic Height - 12.4 in Width - 16.7 in Depth - 2.3 in Color - Black...
-
Overview of Current Media Technologies
Staffs of cultural institutions are increasingly interested in what is available today for captioning and audio description systems, via handheld tours as well as description and caption...
-
Georgia-Pacific Compact Quad® Vertical Four Roll Coreless Tissue Dispenser 56747
Attractive Compact Quad® four roll vertical coreless bathroom tissue dispensing system holds up to 6,000 2-ply or 12,000 1-ply sheets while maintaining your professional look....
-
Georgia-Pacific Compact Quad® Vertical Four Roll Coreless Tissue Dispenser 56743
Attractive Compact Quad® four roll vertical coreless bathroom tissue dispensing system holds up to 6,000 2-ply or 12,000 1-ply sheets while maintaining your professional look....
-
[2010 ADAS] 105.2.2 ASME
This means of communication must connect with emergency or authorized personnel and not an automated answering system. The communication system must be push button activated....
-
2.5.1 U.S. Food and Drug Administration
FDA’s Quality System Regulation was codified in Title 21, Part 820 of the Code of Federal Regulations (21 CFR 820), which incorporates current good manufacturing practice (cGMP) requirements...
-
5.7.1.2 Lift Compatibility Clearance in Base for Imaging Equipment (M301)
Some imaging systems already use overhead lifts to assist patients. Overhead lifts are not feasible in the MR exam room due to the magnetic fields....
-
Q10: What should a school district do if it does not believe that a student needs special education or related services as described in the Section 504 regulation?
This provision requires a school district to establish a system of procedural safeguards for the identification, evaluation, and educational placement of persons who, because of disability...
-
Introduction
These guidelines are legally enforceable on National Forest System lands....
-
FAQ: How do I browse and search content?
When you begin typing a keyword or section number, the system automatically populates a list of possible content matches. ...
