Locate handrails continuously along both sides of the dune crossing at a height of 34 inches (865 millimeters) to 38 inches (965 millimeters) above the walking surface....
Search Results "Fire-Building Surface"
-
Elevated Dune Crossings
-
Suggestion by Eldon Tipping
in Concrete Construction magazine, September 1998, Eldon Tipping made suggestions for a specification for sloped random - traffic floors such as parking decks, ramps, and other sloped surfaces...
-
§ 38.77(b)
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
11B-1008.2.3 Water play components
Where the surface of the accessible route, clear floor or ground spaces, or turning spaces serving water play components is submerged, compliance with Sections 11B-302 _|Floor or Ground...
-
11B-809.2.2 Turning space
For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space complying with 306 to be centered beneath....
-
§ 38.155(a)
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
11B-809.2.2 Turning space
For example, in kitchens, Section 11B-804.3.1 requires at least one work surface with clear floor space complying with Section 11B-306 to be centered beneath....
-
233.3.5 Alterations, F233.3.4 Alterations, F233.4.5 Alterations
Where a building is vacated for the purposes of alteration, and the altered building contains more than 15 residential dwelling units, at least 5 percent of the residential dwelling units...
-
INTRODUCTION
The four standard-setting agencies establish and enforce standards for design, construction, and alteration of particular types of buildings and facilities....
- Xpress II Inclined Platform Wheelchair Lift
- Hager Companies Three Knuckle - Full Mortise Swing Clear Hinge AB7002
- Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1261
- Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1263
- Kompan, Inc. Multi-sport Game Courts Freegame Court FRE2110
- Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1262
- Landscape Structures Power Lifter™ Chinning Bar
-
Significant alternatives which minimize any significant economic impacts on small entities
analyzes the following four requirements in the proposed guidelines that will have more than minimal impacts on state and local transportation departments: Detectable warning surfaces...
-
Characteristics of Study Participants
of community mobility is related to the “accessibility” of outdoor surfaces....
-
Appendix A: Pedestrians with Visual Impairments
the two surfaces....
-
Section 36.406 Standards for New Construction and Alterations (Section-By-Section Analysis and Response to Comments)
to Comments) Section 36.406 implements the requirements of sections 306(b) and 306(c) of the Act, which require the Attorney General to promulgate standards for accessible design for buildings...
-
206.7 Platform Lifts
Platform lifts shall be permitted as a component of an accessible route in an existing building or facility....
-
Areas of Refuge (Preamble, Section-by-Section Analysis)
a stairway, and where people who cannot use stairs may await assistance during a emergency evacuation) will be required, as proposed, but the final provisions are based on the Uniform Building...
-
MEANS OF EGRESS
A continuous and unobstructed path of vertical and horizontal egress travel from any occupied portion of a building or structure to a public way....