In pass through kitchens where counters, appliances or cabinets are on two opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing...
Search Results "Toe Clearance"
Commonly Searched Documents
- 
    
  
  804.2.1 Pass Through Kitchen
  
- 
    
  
  406.4.1 Clear height
  While the minimum height is required to be 7'-0" by this section, greater vertical clearance is required at van-accessible parking spaces, standard accessible parking spaces, the vehicular... 
- 
    
  
  406.4.1 Clear height
  While the minimum height is required to be 7'-0" by this section, greater vertical clearance is required at van-accessible parking spaces, standard accessible parking spaces, the vehicular... 
- 
    
  
  5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301)
  5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301) The Committee recommends the equipment base provide a clearance of 39 inches wide minimum.... 
- 
    
  
  503.5 Vertical Clearance
  503.5 Vertical Clearance.... 
- 
    
  
  6.3(1)
  (1) Each bedroom shall have a door that complies with 4.13. EXCEPTION: Entry doors to acute care hospital bedrooms for in-patients shall be exempted from the requirement in 4.13.6... 
- 
    
  
  6.3(5)
  (5) Each bedroom shall have a door that complies with 4.13. 
- 
    
  
  California/ADA Plan Review Tool - Door Maneuvering Clearances
  California/ADA Plan Review Tool - Door Maneuvering Clearances Click here to view/download the pdf "California/ADA Plan Review Tool - Door Maneuvering Clearances" (250 KB) * * * * *... 
- Figure 607.2 Clearance for Bathtubs – Drawing from the U.S. Access Board
- 
    
  
  Error/Omission: Adequate maneuvering clearance is not provided at doors, including doors to accessible toilet stalls.
  Error/Omission: Adequate maneuvering clearance is not provided at doors, including doors to accessible toilet stalls.... 
- 
    
  
  1017.9 Protruding Objects
  However, entities should maintain the vertical clearance along the trail tread, resting intervals, and passing spaces free from tree branches for 80 inches high minimum above the ground.... 
- 
    
  
  Head Room [4.4.2]
  Circulation paths must provide at least 80 inches of vertical clearance. Otherwise, fixed barriers detectable by canes must define areas with less clearance.... 
- 
    
  
  Voting Area
  Within the voting area there must be enough clearance for an individual with a disability to access and use all the voting equipment.... 
- 
    
  
  M302.4.1 Clearance in Base
  The base of the diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum... 
- 
    
  
  M302.4.1 Clearance in Base
  The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum measured... 
- 
    
  
  11B-503.5 Vertical clearance
  spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide a vertical clearance... 
- 
    
  
  503.5 Vertical Clearance
  spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone, and from the passenger loading zone to a vehicular exit shall provide a vertical clearance... 
- 902.2 Baby Changing Table Knee Clearance
- 
    
  
  405.7.5 Doorways
  Where doorways are located adjacent to a ramp landing, maneuvering clearances required by 404.2.4 and 404.3.2 shall be permitted to overlap the required landing area.... 
- 
    
  
  405.7.5 Doorways
  Where doorways are located adjacent to a ramp landing, maneuvering clearances required by 404.2.4 and 404.3.2 shall be permitted to overlap the required landing area.... 
- 
    
  
  1132A.5.1 General
  Section 1126A.3 shall apply to maneuvering clearances at the side of the door exposed to common or public use spaces.... 
