Coat hooks provided within the room shall be located within one of the reach ranges specified in Section 11B-308. Shelves shall be 40 inches (1016 mm) minimum and 48 inches (1219 mm)...
Search Results "Grab Bar Fitting"
Filters
Commonly Searched Documents
-
11B-803.5 Coat hooks and shelves
-
Study Objectives
Level, highest and lowest heights for transfers to i) a seat with no handhelds present, ii) a seat with grab-bars and iii) a seat with grab-bars and a backrest. b....
-
Railings—Guardrails, Handrails, and Safety
Terminology Tip What's the difference between a guardrail, a handrail, and a grab bar?...
-
4.22.4 Water Closets
4.17; where 6 or more stalls are provided, in addition to the stall complying with 4.17.3, at least one stall 36 in (915 mm) wide with an outward swinging, self-closing door and parallel grab...
-
M305.3.3 Fittings (Section-by-Section Analysis)
The MDE NPRM proposed to prohibit standing supports from rotating in their fittings. There were no comments on this section and it was not addressed by the MDE Advisory Committee....
-
11B-212.1 General
Where provided, kitchens, kitchenettes, wet bars and sinks shall comply with Section 11B-212. [2010 ADA Standards] 212.1 General....
-
Transfer Protocols
Bars Level height, maximum height transfer and Minimum height transfer Participant selects which grab bars to use (2.75in or 6in) and seat width Primary measures:...
-
Figure 1009.4.1 Clear Deck Space at Transfer Walls – Drawing from the U.S. Access Board
-
803.1 General
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General....
-
803.1 General
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General....
-
803.1 General
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General....
-
4.35.1 General
Dressing and fitting rooms required to be accessible by 4.1 shall comply with 4.35 and shall be on an accessible route....
-
11B-803.1 General
Dressing, fitting, and locker rooms shall comply with Section 11B-803. [2010 ADAS] Advisory 803.1 General. ...
-
11B-803.1 General
Dressing, fitting, and locker rooms shall comply with Section 11B-803. [2010 ADAS] Advisory 803.1 General....
-
11B-803.1 General
Dressing, fitting, and locker rooms shall comply with Section 11B-803. Advisory 11B-803.1 General....
-
11B-809.10.8.7 Mirrors and towel bars
Where towel bars are provided they shall be installed 40 inches (1016 mm) maximum above the finish floor to the top of the bar....
-
WET BAR
[DSA-AC] An area or space with a counter equipped with a sink and running water but without cooking facilities.
-
WET BAR
[DSA-AC] An area or space with a counter equipped with a sink and running water but without cooking facilities.
-
11B-226.3 Dining surfaces exceeding 34 inches in height
Where food or drink is served for consumption at a counter exceeding 34 inches (864 mm) in height, a portion of the main counter 60 inches (1525 mm) minimum in length shall be...
-
Scoping [4.1.3(21), 4.1.6(3)(h)]
Scoping [4.1.3(21), 4.1.6(3)(h)] ADAAG requires access to 5% of each "type" of dressing room in each location. “Type” includes those serving different genders or discrete...
-
11B-212.2 Kitchens, kitchenettes, and wet bars
Kitchens, kitchenettes and wet bars shall comply with Section 11B-804. [2010 ADA Standards] 212.2 Kitchens and Kitchenettes. Kitchens and kitchenettes shall comply with 804....
-
Bobrick B-30929 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
Mounts against side wall in accessible toilet compartment to allow clearance for grab bar above unit has toilet tissue dispenser on right side of unit....
-
11B-222.3 Mirrors
Where mirrors are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with Section 11B-803.6....
-
11B-222.3 Mirrors
Where mirrors are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with Section 11B-803.6....
