There is a consensus among studies that transferring to a higher surface implies greater exertion of the upper limb (3-6) . ...
Search Results "Fire-Building Surface"
Commonly Searched Documents
-
Expert opinion on current literature
-
Taking Measurements
Taking Measurements Sloped Surfaces One way to measure slope is to use a 24-inch level with leveling bubble and a tape measure....
-
What was measured and why?
Often, an unstable surface, for example, may be perceived as very difficult because of the unstable footing, even though the individual does not have to exert him/herself....
-
Sec.36.607(a)(2)
(2) For example, if certain equipment is not covered by the code, the determination of equivalency cannot be used as evidence with respect to the question of whether equipment in a building...
-
6.11
any additional wheelchair spaces required by state or local codes beyond those mandated under the ADA Standard 4.33.3 and §§ 221 and 802 of the ADA and ABA Accessibility Guidelines for Buildings...
-
F233.4.3 Additions
Where an addition to an existing building results in an increase in the number of residential dwelling units, the requirements of F233.4.1 shall apply only to the residential dwelling units...
-
End Note
Or, call the toll-free ADA Information Line: 800-514-0301 (voice) • 800-514-0383 (TTY) Expanding Your Market: Building a Diverse Customer Base (PDF version) June 2006 Duplication...
-
IS ASSISTANCE REQUIRED?
Once notified, many people who are deaf or hard of hearing can read and follow standard exit and directional signs and use any standard means of egress from the building....
-
F232.1 General
Buildings, facilities, or portions thereof, in which people are detained for penal or correction purposes, or in which the liberty of the inmates is restricted for security reasons shall...
-
F233.3.2 Additions
Where an addition to an existing building results in an increase in the number of residential dwelling units, the requirements of F233.3.1 shall apply only to the residential dwelling units...
-
233.3.3 Additions
Where an addition to an existing building results in an increase in the number of residential dwelling units, the requirements of 233.3.1 shall apply only to the residential dwelling units...
-
§8.3 Accessible route
Accessible route means a continuous unobstructed path connecting accessible elements and spaces in a building or facility that complies with the space and reach requirements of applicable...
-
10. Vertical Clearance at Exterior Stairs
.: protected with a cane detectable warning, such as the planter shown below or enclosed with walls so a continuous 80" high circulation path is provided for building users)?...
-
SECTION 1010 RAMPS
SECTION 1010 RAMPS [DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is...
-
Sec.36.402(b)(1)
Normal maintenance, reroofing, painting or wallpapering, asbestos removal, or changes to mechanical and electrical systems are not alterations unless they affect the usability of the building...
-
202.6 Architectural Barrier Removal
Removal of architectural barriers, pursuant to 28 C.F.R. s. 36.304, from buildings, structures or facilities shall comply with this code’s requirements for alterations unless compliance...
-
A4.27.3 Height
Electrical receptacles installed to serve individual appliances and not intended for regular or frequent use by building occupants are not required to be mounted within the specified reach...
-
Accessible Route
A continuous unobstructed path connecting all accessible elements and spaces of a building or facility....
-
6.1 General
In addition to the requirements of 4.1 through 4.35, medical care facilities and buildings shall comply with 6....
-
§100.201a(b)(1) ICC/ANSI A117.1-2003
(1) American National Standard: Accessible and Usable Buildings and Facilities, 2003 edition, (ICC/ANSI A117.1-2003), may be obtained from the International Code Council, 500 New Jersey...
-
§100.201a(b)(2) ICC/ANSI A117.1-1998
(2) American National Standard: Accessible and Usable Buildings and Facilities, 1998 edition, (ICC/ANSI A117.1-1998), may be obtained from the International Code Council, 500 New Jersey...
-
§100.201a(b)(3) CABO/ANSI A117.1-1992
(3) American National Standard: Accessible and Usable Buildings and Facilities, 1992 edition, (CABO/ANSI A117.1-1992), may be obtained from the International Code Council, 500 New Jersey...
-
How is “technical infeasibility” determined in an alteration?
Examples include work that would impact a facility’s structural frame or that would conflict with applicable codes or building requirements....
-
Exception 3
consisting of one or more of the following items shall be limited to the actual scope of work of the project and shall not be required to comply with Section 11B-202.4: Altering one building...