2.4.2 When defining acceptable methods of correction for a non - complying element, give reasonable consideration to how the remedial action may affect construction time, cost,...
Search Results "Seat Designation"
Filters
Commonly Searched Documents
-
2.4.2
-
1.2.1
1.2.1 Use the plus - or - minus symbol (ยฑ) after a dimension when it must be made clear what the expected tolerance is. This should be coordinated with the specification...
-
4.26.1* GENERAL
All handrails, grab bars, and tub and shower seats required to be accessible by 4.1, 4.8, or 4.9 shall comply with 4.26....
-
11B-1002.4.7 Companion seats
Where the interior width of the amusement ride is greater than 53 inches (1346 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
11B-1002.4.7 Companion seats
Where the interior width of the amusement ride is greater than 53 inches (1346 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
11B-1002.4.7 Companion seats
Where the interior width of the amusement ride is greater than 53 inches (1346 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
4.26.1* General
All handrails, grab bars, and tub and shower seats required to be accessible by 4.1, 4.8, 4.9, 4.16, 4.17, 4.20 or 4.21 shall comply with 4.26....
-
Components (M303.4)
The height of the component and any adjustable feature would have to accommodate patients seated in a wheelchair....
-
Clear Floor or Ground Space: ADA Standard Section 1002.5.1
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
-
5.3.3.1 Height
The total height of the toilet seat on the riser for a pit toilet shall be between 17 inches (430 mm) and 19 inches (485 mm) above the floor or ground surface....
-
1001.1 Scope
Unless otherwise modified or specifically addressed in Chapter 10, all other requirements in this document apply to the design and construction of recreation facilities.ย ...
-
Phasing in Play Areas
โPhased Designsโ are play areas developed to be installed in different stages, allowing the play area to grow in a planned manner while accommodating budgets, fund raising, or community...
-
1001.1 Scope
Unless otherwise modified or specifically addressed in Chapter 10, all other requirements in this document apply to the design and construction of recreation facilities....
-
Living Room
High contrast between the seating, floor, and walls....
-
Figure 610.3.2 L-Shaped Shower Seat โ Drawing from the U.S. Access Board
-
11B-1002.5.1 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
-
Seat Heights
Seat Heights: Transfer platforms in play areas need to be between 11 and 18 inches maximum above the ground (ADA-ABA Section 1008.3.1.2)[7]....
-
American Specialties Folding Shower Seat Model 8208-R 3D Model
Requires the Premium User plan or above. (Login or upgrade your account!) -
Bobrick Folding Shower Seat B-518 Elevations
Requires the Premium User plan or above. (Login or upgrade your account!) -
ยง 36.308 Seating in assembly areas.
A public accommodation shall ensure that wheelchair spaces and companion seats are provided in each specialty seating area that provides spectators with distinct services or amenities that...
-
Symmons HC3/HC4 Folding Padded Shower Seat & Grab Bar
Symmons Shower Seat and Grab Bar HC-3 and HC-4 Symmons folding padded seat and two wall grab bar for shower enclosure (left and right hand configurations)....
