[See subsections ...]
Search Results "Seat Designation"
Filters
Commonly Searched Documents
-
A4.32 SEATING, TABLES, AND WORK SURFACES
-
4.32.1 Minimum Number
Fixed or built-in seating or tables required to be accessible by 4.1 shall comply with 4.32....
-
David K. Tozer.
David is Senior Designer at George Sexton Associates. He’s a design consultant....
-
Designing Accessible Communities
"Designing Accessible Communities" was formed in 2006....
-
4.32.1 MINIMUM NUMBER
Fixed or built-in seating, tables, or work surfaces required to be accessible by 4.1 shall comply with 4.32....
-
Minimum Number: ADA Standard Section 234.3
Section 234.3 covers scoping requirements in the current ADA Standards for the minimum number of wheelchair spaces required at amusement rides.
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
-
TACTILE SIGN
TACTILE SIGN. A sign containing raised characters and/or symbols and accompanying Braille.
-
Solutions to Enhance Wayfinding (slides 8 -15)
[See subsections ...]
-
Exterior Features
Glass garage and barn doors for extra light without extra energy use. Preheated hot water from solar panels for water heater, spa, radiant heating. Greenhouses...
-
Study Questions
Study Questions The purpose of this study was to evaluate a variety of playground surfaces, their ability to meet accessibility requirement, their costs upon initial installation...
-
Selection of Playgrounds
Selection of Playgrounds Newly constructed public playgrounds were selected for participation as test sites in the study. A purposive snowball sampling technique was used to...
-
2.1.1
2.1.1 Clearly state the required installed tolerances for critical construction elements. In most cases, it is best to refer to industry standard tolerances or other industry...
-
2.1.2
2.1.2 State the required tolerances for elements for which there are no industry standards. These may also include elements for which there is an industry tolerance for one aspect of...
-
2.4.1
2.4.1 Based on the methods for measuring compliance, define what remedial actions are acceptable when construction elements exceed tolerances. These may include total replacement,...
-
2.3.2
2.3.2 Define the measurement tools that should be used. The acceptable tools should be selected based on the accuracy required and a reasonable balance between the accuracy of the...
-
2.1.3
2.1.3 State requirements for critical accumulated tolerances. These are instances where individual products and installation procedures may conform to industry standard tolerances...
-
TACTILE SIGN
A sign containing raised characters and/or symbols and accompanying Braille.
-
TACTILE SIGN
A sign containing raised characters and/or symbols and accompanying Braille.
-
Institute for Human Centered Design (IHCD)
The Institute for Human Centered Design (IHCD), founded in Boston in 1978 as Adaptive Environments, is an international non-governmental educational organization (NGO) committed to advancing...
-
Contrast and wayfinding, short-term and long-term
It was a matter of the design team relooking at a problem and coming up with design solutions; [to assure] that many of the decisions that they were making were not made to be barriers to...
-
Guestrooms with Roll-in Showers
motels, or other lodging facilities of 50 or more sleeping rooms, no rooms with roll-in showers are provided, or the roll-in showers that are provided lack a permanently attached fold-down seat...
-
11B-802.2.1 Lines of sight over seated spectators
Where spectators are expected to remain seated during events, spectators in wheelchair spaces shall be afforded lines of sight complying with Section 11B-802.2.1....
-
11B-802.2.1 Lines of sight over seated spectators
Where spectators are expected to remain seated during events, spectators in wheelchair spaces shall be afforded lines of sight complying with Section 11B-802.2.1....
