The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
Search Results "Measuring Technique"
Filters
Commonly Searched Documents
-
§ 38.125(b)(6) Platform surface
-
§ 38.95(b)(6) Platform surface
The lift platform shall have a minimum clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches...
-
Tile Tech Pavers® Porcelain Pavers™ Series
But with advances in manufacturing techniques and new technology, it is now possible to make porcelain pavers & tiles in a much greater thickness and size, enabling the porcelain pavers...
-
Kawneer North America 190/350/500 Standard Entrances
The 190 Narrow Stile Entrance Is engineered for moderate traffic in applications such as stores, offices and apartment buildings Vertical stile measures 2-1/8" (54); top rail 2-1...
-
Part 3: Polling Place Accessibility Checklist
In completing the checklist, provide a measurement for every question with a "no" answer....
-
Performance and Productivity
Response by Mariana Figueiro: Measuring productivity is really hard....
-
I. Definitions
. § 35.151) on Election Day, whether such compliance is achieved through permanent architectural measures or through the use of temporary measures such as those provided for in Paragraph...
-
Platform Height
Platform Height Transfer platforms must be between 16 and 19 inches high, measured from the deck....
-
6b. Ramp Width
Is the ramp width, measured between handrails, at least 36 inches? [ADA Stds 4.8.3] Yes _____ No _____...
-
4b.
Is the ramp width, measured between handrails, at least 36 inches? [ADA Stds 4.8.3] Yes _____ No _____...
-
Unobstructed: ADA Standard Section 308.3.1
Section 308.3.1 covers the current ADA Standards for unobstructed side reach.
-
907.4.2.2 Height
The height of the manual fire alarm boxes shall be not less than 42 inches (1067 mm) and not more than 48 inches (1219 mm) measured vertically, from the floor level to the highest point...
-
8.2.2 Stimuli
For the teleloop noise and peak clipping conditions digital signal processing techniques were used to simulate real-world listening conditions....
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
VIII. Existing Facilities: Alternatives to Barrier Removal
Examples of alternative measures include -- Providing goods and services at the door, sidewalk, or curb, Providing home delivery, Retrieving merchandise from inaccessible...
-
1003.2.12.1 Height
Guards shall form a protective barrier not less than 42 inches (1067 mm) high, measured vertically above the leading edge of the tread, adjacent walking surface or adjacent seatboard....
-
T503.5 Exterior Illumination for Boarding and Alighting Areas
Where doorways have steps, the illumination shall be 1 foot-candle (11 lux) minimum for a distance of 3 feet (915 mm) measured beyond the outside edge of the doorway or bottom step tread...
-
1003.2.12.1 Height
Guards shall form a protective barrier not less than 42 inches (1067 mm) high, measured vertically above the leading edge of the tread, adjacent walking surface or adjacent seatboard....
-
D. Signage
Existing tactile signage will be relocated to between 48 inches measured to the baseline of the lowest tactile character and 60 inches measured to the baseline of the highest tactile character...
-
609.4 Position of Grab Bars
Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
Recreation and Heritage Resources Integrated Business Systems
Compliance with the accessibility guidelines (figure 26) is an important quality measure within the national standards for recreation sites under the responsiveness key measure....
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
Doorbell Factory Medium Rectangle Stainless Steel Doorbell
Solid 3/16" thick Stainless Steel Plate Comes with non-lighted stainless steel push button and mounting screws Measures 2" W X 4" H Usually ships in 1-3 business...
-
Opening Force [§404.2.9]
Latch bolts must be retracted and other devices that keep doors or gates closed must be disengaged prior to measuring the opening force....
