Search Results "Height Adjustable"

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  604.4 Seats

  The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat....

• Federal Documents > Technical Assistance > 2013 Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG)
  604.4 Seats

  The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat....

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  1133A.4.1, Item 1

  Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28 inches (711 mm)....

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  1133A.4.1, Item 1

  Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28 inches (711 mm)....

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  A4.15.2 Spout Height

  Two drinking fountains, mounted side by side or on a single post, are usable by people with disabilities and people who find it difficult to bend over.

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M301.4 Lift Compatibility (Section-by-Section Analysis)

  The MDE NPRM proposed to require that diagnostic equipment used by patients in the supine, prone, or side-lying position be usable with a patient lift and comply with either the...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302

  5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302 Description: A clearance around the gripping surface is necessary to ensure sufficient space for...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.7 Lift Compatibility

  5.7 Lift Compatibility.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.7 Transfer Support Gripping Surface Clearance for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position

  5.4.7 Transfer Support Gripping Surface Clearance for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position. There should be a 1½ inches minimum clearance around the...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.7 Lift Compatibility Recommendations

  5.7 Lift Compatibility Recommendations

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position

  5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position. The transfer support should be located a maximum distance...

• Federal Documents > Regulations > 49 CFR Parts 37 & 38 - Department of Transportation (DOT) ADA Regulations
  § 38.39(b)

  (b) Characters on signs required by paragraph (a) of this section shall have a width-to-height ratio between 3:5 and 1:1 and a stroke width-to-height ratio between 1:5 and 1:10, with a minimum...

• Federal Documents > Standards > 2010 ADA Standards
  Water Flow: ADA Standard Section 602.6

  Section 602.6 covers the current ADA Standards for the drinking fountain water flow.

• Federal Documents > Standards > 2010 ADA Standards
  Drinking Fountains for Standing Persons: ADA Standard Section 602.7

  Section 602.7 covers the current ADA Standards for drinking fountains for standing persons.

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-602.7 Drinking fountains for standing persons

  Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1092 mm) maximum above the finish floor or ground.

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-602.6 Water flow

  The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit. The angle of the water stream shall...

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M305.2.1 Location (Section-by-Section Analysis)

  The Committee explained that “transfer supports or handholds on adjustable medical equipment facilitate transfers onto a transfer surface by giving the individual something to hold or grab...

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  7.3 CHECK-OUT AISLES

  Clear aisle width shall comply with 4.2.1 and maximum adjoining counter height shall not exceed 36 in (915 mm) above the floor....

• Research and History > Research Documents > Independent Wheelchair Transfers in the Built Environment: How Transfer Setup Impacts Performance Phase 2: Final Report
  Conclusion

  to floor height (22.1 inches) and to a platform that was 27 inches wide....

• Federal Documents > Standards > 2010 ADA Standards
  Position of Grab Bars: ADA Standard Section 609.4

  Section 609.4 covers the current ADA Standards for the position of grab bars.

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  4.1.7(3)(e)

  (e) Displays and written information, documents, etc., should be located where they can be seen by a seated person. Exhibits and signage displayed horizontally (e.g., open books),...

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  4.1.7(2)(e)

  (e) Displays and written information, documents, etc, should be located where they can be seen by a seated person. Exhibits and signage displayed horizontally, e.g., books, should be...

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-1005.2.1.1 Dispersion

  Railings, guards, or handrails required to comply with Section 11B-1005.2.1 shall be dispersed throughout the fishing pier or platform. [2010 ADAS] Advisory 1005.2.1.1...

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-1005.2.1.1 Dispersion

  Railings, guards, or handrails required to comply with Section 11B-1005.2.1 shall be dispersed throughout the fishing pier or platform. Advisory 11B-1005.2.1.1 Dispersion....