The technical requirements in 1017.11 require the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and minimum...
Search Results "Ramp Surface"
-
F216.13 Trailhead Signs
-
1016.1 General
The technical requirements address the surface of outdoor recreation access routes, passing spaces, and resting intervals (1016.2); the clear width of outdoor recreation access routes (1016.3...
-
Location
An accessible route never has curbs or stairs, must be at least 3- feet wide, and has a firm, stable, slip-resistant surface....
-
Suggested best practices for architects and other design professionals
architects and other design professionals As the construction industry works to develop standards for construction tolerances related to specific materials and applications for accessible surfaces...
-
Signage
Signs should not be made of reflective materials such as brass, silver, gold, glass, or mirrored surfaces unless there is an additional properly located sign that complies with the Standards...
-
Location
An accessible route never has curbs or stairs, must be at least 3- feet wide, and has a firm, stable, slip-resistant surface....
-
Value Contrast (slide 9)
Fixed Surfaces To show where vertical and horizontal surfaces meet is very important. To show edges is very important....
-
Telescopes and Periscopes
Whenever a telescope or periscope is provided, ensure that a separate telescope or periscope is available for use from a standing position (60 inches above the floor or ground surface is...
-
Trail Slopes
Cross slopes—the side-to-side slope of a trail tread (figure 131)—provide drainage to keep water from ponding and damaging the trail, especially on unpaved surfaces....
-
2.3.2 IR Receivers
In these instances, the receiving diode can be placed within an oblong lens on the top of the headband, for presumably 360 degree reception, or appear as a rounded protuberance on the surface...
-
III. Summary of Comments
Survey,3 including equipment characteristics that affect patients ability to access and use medical equipment, such as: dimensions of the equipment (e.g. height, width, length,) contact surfaces...
-
B. The ADA Standards for Accessible Design
Section 904.2 requires that “[a]ll portions of counters required to comply with 904 shall be located adjacent to a walking surface complying with 403.” 2010 Standards § 904.2....
-
C. Raised Porches Are Part Of the Store That Must Be Made Accessible and Located On An Accessible Route
Pursuant to Chapter 3, accessible spaces must have compliant floor surfaces, compliant turning space, and compliant clear floor space, among other requirements. 2010 Standards, §§ 301-309...
-
Bradley Chrome-Plated Towel Hook 9311
Bradley Chrome-Plated Towel Hook Model 9311 Surface-Mounted - Concealed Wall Plates Die Cast Zamac with Polished Chrome Finish...
-
Bradley Angle Frame Mirror 780
Satin finish Stainless Steel angle frame Welded corners Theft resistant mounting Alternate reflective surfaces available Standard sizes available BradEX...
-
Bradley Chrome-Plated Hook and Bumper 915
Bradley Chrome-Plated Hook and Bumper Model 915 Surface-Mounted - Exposed Mounting Chrome-Plated Brass Double Hook Available BradEx Fast Ship...
-
Bradley Channel Frame Mirror 781
Bright polished stainless steel frame Roll-formed channel frame Theft resistant mounting Alternate reflective surfaces available Standard sizes available...
-
Incorporation of Guidelines for Play Areas and Recreation Facilities
They cover the number of play components required to be accessible, accessible surfacing in play areas, ramp access and transfer system access to elevated structures, and access to soft...
-
SDC Bollard Post with Push Plate or Touch Panel
Practical solution for surface mount or in-ground installation....
-
Mockett PCS38-94 Clamp-On Power Grommet
It clips onto desks or work surfaces, and sits up and off desk for chic added touch. Standard configuration: Three electrical outlets rated 15A/125VAC and two Category 5e data ports....
-
Face® Dipstick® Floor Profiler (Measuring F-Numbers - Concrete Flatness & Levelness Measurement)
it never needs recalibration – which saves many thousands of dollars over the life of the instrument; the only profiler that instantly produces reports, graphs, line surveys and 3D surface...
-
American Standard Yorkville 1.6 gpf Right Height Elongated Pressure Assisted Toilet
Floor-mounted, back-outlet toilet combination bowl and tank less seat Pressure-assisted siphon jet action EverClean® Surface Elongated 16-1/2" high bowl for accessible...
-
American Standard Cadet 1.6 gpf Right Height Elongated Pressure Assisted Toilet
Combination bowl and tank, less seat 12" (305mm) rough EverClean® Surface Elongated bowl Pressure-assisted siphon jet flush action 16-1/2" rim height...
-
Bradley 1-Station Frequency Lavatory System FL-1H & FL-1L
Accommodating one user at a time, the FL-Series features a solid surface countertop with a one-of-a-kind integral bowl....
