The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
Search Results "Wheel Stop"
-
11B-1009.2.4 Seat
-
1. Snow and Ice
Likewise, if snow or icy conditions at a bus stop make it difficult or impossible for a fixed route passenger with a disability to get to a lift, or for the lift to deploy, the driver should...
-
F206.2.1 Site Arrival Points
least one accessible route shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks; and public transportation stops...
-
RESEARCH NEEDS
Guidelines for computing the optimal location of the stop bar are needed. U.S....
-
Category 2 Eligibility
If the lift on a vehicle cannot be deployed at a particular stop, an individual is eligible for paratransit under this category with respect to the service to the inaccessible stop....
-
Openings [1018.6]
Gaps, including spaces between the planks on a boardwalk and drainage holes in temporary or permanent surfaces, that are big enough for wheels, canes, or crutch tips to drop through or become...
-
Outdoor Conditions [4.8.8]
Puddling that causes shoes, wheels, or crutch tips to become wet will reduce slip-resistance even where the ramp surface is dry....
-
1016.8.4 Turning Space
., as flat as possible) so that all the wheels of a mobility device touch the ground when turning into and out of the resting interval....
-
Transportation Facilities
Bus stops and stations, rail stations, and other transportation facilities are required to be accessible by the ADA....
-
R305.2.7 Boarding and Alighting Areas
At boarding and alighting areas at sidewalk or street level transit stops for rail vehicles, detectable warning surfaces shall be placed at the side of the boarding and alighting area facing...
-
Aqua Creek Portable Pro Pool Lift Video
Simply wheel this pool lift to the poolside, quickly deploy, and it's ready to use. ...
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Car Position Indicators [4.10.13]
Verbal announcements must announce each floor a car stops at but not each floor passed....
-
11B-405.9.2 Curb or barrier
To prevent wheel entrapment, the curb or barrier shall provide a continuous and uninterrupted barrier along the length of the ramp....
-
Openings [1016.6]
Gaps, including spaces between the planks on a boardwalk or slots in a drainage grate, that are big enough for wheels, cane, or crutch tips to drop through or become trapped in are potential...
-
22. Navigating an Incline, or Around Obstacles
., a driveway or sidewalk) with the passenger's wheeled device should generally be granted....
-
22. Navigating an Incline, or Around Obstacles
., a driveway or sidewalk) with the passenger's wheeled device should generally be granted....
-
502.3 Access Aisle
All spaces must be located on an accessible route that is at least 44 inches (1118 mm) wide so that users are not compelled to walk or wheel behind parked vehicles except behind his or her...
-
T702.4 Character Height
less than 70 inches (1780 mm) above the non-rail vehicle floor 5/8 inch ;(16 mm) Interior signs designating wheelchair spaces, priority seats, stop...
-
Allowances for Typical Roadway Geometry
without slowing or stopping (see R302.6.1)....
-
AccessRec De-Bug All Terrain Wheelchair
Casters - rear wheels rotate 360 degrees . Wheel hubs are made from polynylon material to eliminate salt water corrosion....
-
Automatic Operation [4.10.2]
Self-leveling must correct the overtravel or undertravel of a car as it stops at a landing within a ½ inch vertical tolerance since changes in level greater than ½ inch can be troublesome...
