Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
Search Results "Wheel Stop"
Filters
Commonly Searched Documents
-
11B-409.4.4 Leveling
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
-
Openings [1017.6]
Gaps, including slots in a drainage grate and spaces between the planks on a bridge or boardwalk (figure 7), that are big enough for wheels, canes, or crutch tips to drop through or become...
-
Ramps [4.8]
The curvature and slope typically result in an uneven surface that makes wheelchair maneuvering difficult because not all wheels rest on the surface....
-
Openings in Beach Access Routes
Openings that are big enough to allow wheels, cane or crutch tips, or shoe heels to drop through or get stuck are hazards that shouldn't exist in pedestrian routes....
-
Openings in Outdoor Recreation Access Route Surfaces
Openings that are big enough to allow wheels, cane or crutch tips, or shoe heels to drop through or get stuck are hazards that shouldn't occur in pedestrian routes (figure 43)....
-
WHEELCHAIR
A chair mounted on wheels to be propelled by its occupant manually or with the aid of electric power, of a size and configuration conforming to the recognized standard models of the trade...
-
Re: 405 Ramps
A ramp with a direction change requires a 60" x 60" minimum intermediate landing, which isn't just a turning space but also a place for stopping to allow for a turn....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a of 1/2 inch (13 mm) under rated loading to zero loading conditions....
-
§ 37.42(c)(4)
(4) Mini-high platforms, with multiple mini-high platforms or multiple train stops, as needed, to permit access to all accessible cars available at that station; or...
-
§ 37.42(c)(4)
(4) Mini-high platforms, with multiple mini-high platforms or multiple train stops, as needed, to permit access to all accessible cars available at that station; or...
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
-
Clear Width [4.13.5] and Vertical Clearance
Clear Width [4.13.5] and Vertical Clearance The clear width of the opening is measured from the face of the door in a 90 degrees open position to the opposite stop....
-
What distinguishes passenger loading zones from bus loading zones?
designated or specified public transportation as defined by DOT’s ADA regulations, including charter service, which are subject to criteria for bus loading zones (§209.2.2) or on-street-bus stops...
-
"Wheelchair" (Section-by-Section Analysis)
Typically, the devices covered under the proposed definition are single-user, have three to four wheels, and are appropriate for both indoor and outdoor pedestrian areas. ...
-
"Wheelchair" (Section-by-Section Analysis)
Typically, the devices covered under the proposed definition are single-user, have three to four wheels, and are appropriate for both indoor and outdoor pedestrian areas....
-
Primary Function
., in highway rest stops. 35.151(b)(4)(i)(A)] ...
-
Bus Loading Zones: ADA Standard Section 209.2.2
Section 209.2.2 covers scoping requirements in the current ADA Standards for bus loading zones.
-
382.91 What assistance must carriers provide to passengers with a disability in moving within the terminal?
One addition concerns enroute stops at the entrance to a rest room....
-
WHEELCHAIR
A chair mounted on wheels to be propelled by its occupant manually or with the aid of electric power, of a size and configuration conforming to the recognized standard models of the trade...
-
1017.8.4 Turning Space
., as flat as possible) so that all the wheels of a mobility device touch the ground when turning in and out of the resting interval....
-
Slope [4.3.7]
They also disrupt the balance of force used in propelling both wheels of manual chairs....
-
11B-405.9.2 Curb or barrier
To prevent wheel entrapment, the curb or barrier shall provide a continuous and uninterrupted barrier along the length of the ramp....
-
11B-405.9.2 Curb or barrier
To prevent wheel entrapment, the curb or barrier shall provide a continuous and uninterrupted barrier along the length of the ramp....