The surface of the clear floor or ground space for trash, recycling, and other essential containers shall be firm and stable....
Search Results "Surface Slope"
Filters
Commonly Searched Documents
-
4.5.4 Surface
-
Q6.) How important is the method of measurement in considering the tolerances allowable in finished construction?
For ramps and curb ramps, DOJ has issued two technical assistance documents that show how to measure slopes. ...
-
7.4.1 Surface
The trail tread surface, including resting intervals and passing spaces, shall be both firm and stable....
-
4.3.4 Tent Pad or Platform Surface
Tent pads and platforms shall have a surface that is firm and stable and is designed to allow use of tent stakes and other tent securing devices. Exception. ...
-
Selection of Trail Surface Materials
Selection of Trail Surface Materials A review of trail surfacing products conducted for this project identified approximately 80 different trail surface materials that promoted providing...
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
Surface discontinuities
Differences in level between two adjacent surfaces. Elevation changes due to ramps or stairs do not, themselves, constitute surface discontinuities....
-
Error/Omission: Parts of an accessible route with slopes that exceed 1:20 lack required features including handrails and edge protection.
Error/Omission: Parts of an accessible route with slopes that exceed 1:20 lack required features including handrails and edge protection....
-
5.3.2.2 Surface
The surface of the turning space and clear floor or ground space shall be firm and stable....
-
1012.4 Surface
This section requires the surface of parking spaces and pull-up spaces to be firm and stable....
-
Dispersion: ADA Standard Section 226.2
Section 226.2 covers scoping requirements in the current ADA Standards for dispersion of dining surfaces and work surfaces.
-
TechniSoil G3® Pathway Stabilizer Video
Requires the Registered User plan or above. Login! -
R409.8 Surfaces
R409.8 Surfaces. Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
-
T402.5 Surfaces
Ramp and bridgeplate surface material shall comply with T302 and extend across the full width and length of the ramp or bridgeplate....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
Unitary Surface
Unitary Surfaces. The predominant surface characteristic is whole. ...
-
3.1.3.2 Running Slope (Grade) of Driveways
The running slope of driveways shall be no more than 1:12 (8.33 percent) for no more than 50 feet (15 m). Exception 1....
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
floor to have a smooth surface on the push side....
-
4.2.7 Surface
The surface of the clear floor or ground space shall be firm and stable. The type of surface should be appropriate to the setting and level of development....
-
902 Dining Surfaces and Work Surfaces
902 Dining Surfaces and Work Surfaces...
-
226 Dining Surfaces and Work Surfaces
226 Dining Surfaces and Work Surfaces...
-
505.6 Gripping Surface
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....